USB Programming Cable (Easergy Pro)

USB programming cable (Easergy Pro).
Label :  eSetup Easergy Pro
-  range of product :  Easergy P3
-  product or component type :  programming cable
-  communication port support :  USB type A USB
-  integrated connection type :  USB type B
-  cable length :  3 m
-  Range Presentation :  During engineering
-  Create the configuration of the Easergy P3 relay, select the appropriate options and receive the order code
-  Set the characteristics of the CTs, VTs, or sensors connected to the relay, and select the protection functions that will be activated and their settings
-  Build specific logic conditions, if required, using a graphic editor
-  Map the digital inputs (DI) and different internal signals to the relevant functions, LEDs, and digital outputs (DO), using a straightforward matrix format.
-  Draw the single-line diagram (SLD) that will appear on the front display of the relay for switchgear control and select the measurements that will be displayed. If any, build the interlocking logic using a matrix format
-  Configure IEC 61850 protocol data set and the report control blocks that will be published and select the GOOSE data to which you want to subscribe
-  Complete the setting of additional functions (disturbance recorder, event logging system, clock synchronization, etc.).
During commissioning
-  Create the configuration of the Easergy P3 relay :  select the appropriate options and receive the order code
-  Set the characteristics of the CTs, VTs, or sensors connected to the relay, and select the protection functions that will be activated and their settings
-  Build specific logic conditions, if required, using a graphic editor
-  Map the digital inputs (DI) and different internal signals to the relevant functions, LEDs, and digital outputs (DO), using a straightforward matrix format.
-  Draw the single-line diagram that will appear on the front display of the relay for switchgear control and select the measurements that will be displayed. If any, build the interlocking logic using a matrix format
-  Configure IEC 61850 protocol data set and the report control blocks that will be published and select the GOOSE data to which you want to subscribe
-  Complete the setting of additional functions (disturbance recorder, event logging system, clock synchronization, etc.).
During operation
-  Connect to the front panel of a single relay or gain access to several relays by connecting to Ethernet
-  Get the most of the metering capabilities during normal operation of the Easergy P3 protection relay : 
-  Navigate the different measurements menus to access the power monitoring and power quality data.
-  Open the disturbance recorder menu to get a waveform capture or program the recording of a power trend.
-  Understand a trip, using eSetup Easergy Pro to investigate the fault data
-  Check the fault log of the protection that has tripped the circuit breaker
-  Download the disturbance record from the Easergy P3 and display it with a disturbance recorder evaluation tool, eg. Wavewin.
-  Range Benefits :  • Simplified installation in your computer (.exe file format)
• On
- line and Off
- line connection to Easergy P3
• Direct access to CB control with mirror HMI display
• Intuitive logic programming
• Simple configuration using the protection Matrix
• Easy testing with the Virtual Injection Test
• User-friendly single-line diagram programming
• Direct access to measurement with phasor diagrams
-  Range Application Presentation :  eSetup Easergy Pro is used to support Easergy P3 protection relays in various applications : 
• Utilities
• Commercial Buildings
• Industries
• Oil & Gas
• MMM
• Hospitals
• Data Center
• Transportation
• Renewables and Solar generation
• Marine