METSEPM5320 - PM5320 Meter, Ethernet, Up To 31st H, 256K 2DI/2DO 35 Alarms
Schneider
SKU
SE_METSEPM5320
Model
METSEPM5320
SGD $1,831.04 All prices inclusive of GST
Short description of METSEPM5320
METSEPM5320.
This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 31st Harmonic. Include 256 kiloBytes of memory for two fixed parameters, active and reactive energy. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 415 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 35 to 690 VAC at 47 to 63 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 47 to 63 Hz. Communication protocol are Modbus TCP/IP and BACnet/IP based on 10/100 Mbit/s, Ethernet with RJ45 port support. The meter also has two digital inputs or digital outputs, configurable. There are 35 configurable alarms and it supports four tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.83 inches (72 millimetres), height 3.78 inches (96 millimetres) and product weight 15.2 onces (430 g).
Country of Origin
India
PM5320 powermeter w ethernet
- upto 31st H
- 256K 2DI/2DO 35alarms
- flush mount.
Label : PowerLogic PM5000 series
- range : PowerLogic
- product name : PowerLogic PM5000
- device short name : PM5320
- product or component type : power meter
- market segment : N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A
- Range Presentation : The PowerLogic PM5000 series power meters are the new benchmark in affordable, precision metering. It is the ideal fit for high-end cost management applications, providing the measurement capabilities needed to allocate energy usage, perform tenant metering and sub
- billing, pin
- point energy savings, optimize equipment efficiency and utilization, and perform a high level assessment of the power quality in an electrical network.
- Range Benefits : End users benefit
- Comprehensive, consistent and superior performance with compliance to international metering standard IEC 61557
- Precision metering & sub
- billing thanks to energy metering compliance to IEC 62053-22 Class 0.5S to 0.2S
- Help save on energy costs through demand logging with timestamp, alarms and relays
- Billing flexibility with compliance to MID and support for up to 8 different tariffs
- Improve electrical network management with power quality analysis features
- Ease of use with intuitive menu
- driven navigation and support for 8 different languages
- Complete WAGES monitoring due to 4 Digital Inputs & 2 Digital outputs (solid state)
- Seamless integration with StruxureWare Power Monitoring Expert software Panel builders benefit
- Ease of installation thanks to numerous design features means less time to install and more savings
- Ease of programming due to an enhanced, intuitive, menu
- driven graphical user-interface
- Cost effectiveness for the price sensitive panel builder, as a single product or product family can meet the majority of requirements
- Aesthetically pleasing offer to help boost the panel builders’ image and reputation
- Simplified ordering for a comprehensive set of features in the best combinations
- no feature overlap with option modules System integrators benefit
- Ease of integration into larger systems and solutions with dual Ethernet and proper protocols, thus saving them time (and money)
- Ease of setup thanks to the intuitive menu navigation on the graphical display, including phasor wiring validation, and onboard web pages
- Cost effectiveness since a single product (or product family) that can meet the majority of system requirements
- Range Application Presentation : The PowerLogic PM5000 series meters are capable of essential cost management applications :
- Cost allocation to aggregate energy consumption of all utilities (i.e., WAGES) and allocate costs per area, per usage, per shift, or per time within the same facility
- Sub billing to charge tenants for individually measured utility (i.e., WAGES) usage
- Bill checking to verify that the utility only charged for actual energy usage The PowerLogic PM5000 series meters are also ideal for sub
- metering applications, as the meters track real-time power conditions and monitor control functions, provide basic power quality values, and monitor equipment and network status in an effort to increase network reliability and power availability.
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- upto 31st H
- 256K 2DI/2DO 35alarms
- flush mount.
Label : PowerLogic PM5000 series
- range : PowerLogic
- product name : PowerLogic PM5000
- device short name : PM5320
- product or component type : power meter
- market segment : N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A, N/A
- Range Presentation : The PowerLogic PM5000 series power meters are the new benchmark in affordable, precision metering. It is the ideal fit for high-end cost management applications, providing the measurement capabilities needed to allocate energy usage, perform tenant metering and sub
- billing, pin
- point energy savings, optimize equipment efficiency and utilization, and perform a high level assessment of the power quality in an electrical network.
- Range Benefits : End users benefit
- Comprehensive, consistent and superior performance with compliance to international metering standard IEC 61557
- Precision metering & sub
- billing thanks to energy metering compliance to IEC 62053-22 Class 0.5S to 0.2S
- Help save on energy costs through demand logging with timestamp, alarms and relays
- Billing flexibility with compliance to MID and support for up to 8 different tariffs
- Improve electrical network management with power quality analysis features
- Ease of use with intuitive menu
- driven navigation and support for 8 different languages
- Complete WAGES monitoring due to 4 Digital Inputs & 2 Digital outputs (solid state)
- Seamless integration with StruxureWare Power Monitoring Expert software Panel builders benefit
- Ease of installation thanks to numerous design features means less time to install and more savings
- Ease of programming due to an enhanced, intuitive, menu
- driven graphical user-interface
- Cost effectiveness for the price sensitive panel builder, as a single product or product family can meet the majority of requirements
- Aesthetically pleasing offer to help boost the panel builders’ image and reputation
- Simplified ordering for a comprehensive set of features in the best combinations
- no feature overlap with option modules System integrators benefit
- Ease of integration into larger systems and solutions with dual Ethernet and proper protocols, thus saving them time (and money)
- Ease of setup thanks to the intuitive menu navigation on the graphical display, including phasor wiring validation, and onboard web pages
- Cost effectiveness since a single product (or product family) that can meet the majority of system requirements
- Range Application Presentation : The PowerLogic PM5000 series meters are capable of essential cost management applications :
- Cost allocation to aggregate energy consumption of all utilities (i.e., WAGES) and allocate costs per area, per usage, per shift, or per time within the same facility
- Sub billing to charge tenants for individually measured utility (i.e., WAGES) usage
- Bill checking to verify that the utility only charged for actual energy usage The PowerLogic PM5000 series meters are also ideal for sub
- metering applications, as the meters track real-time power conditions and monitor control functions, provide basic power quality values, and monitor equipment and network status in an effort to increase network reliability and power availability.
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Analogue Input Number | 100...415 V AC 45...65 Hz 125...250 V DC |
| Contacts Type And Composition | 1 A 5 A |
| Control Type | 1P + N 3P 3P + N |
| Display Type | backlit LCD |
| Measurement Accuracy | active energy +/- 0.5 % active power +/- 0.5 % apparent power +/- 0.5 % current +/- 0.5 % frequency +/- 0.05 % power factor +/- 0.005 reactive energy +/- 2 % voltage +/- 0.5 % |
| Mounting Diameter | 2 digital |
| Product Or Component Type | power meter |
| Web Server | 256 kB |
| Communication Port Protocol | BACnet IP Modbus TCP/IP at 10/100 Mbit/s, insulation 2500 V |
| Device Short Name | PM5320 |
| EAN13 | 3606480614019 |
| Mounting Support | framework |
| Power Quality Analysis | up to the 31st harmonic |
| Range | PowerLogic |
| Range Name | PM5000 series |
| Type Of Measurement | active and reactive power current energy frequency power factor voltage |
| COMPLEMENTARY | |
| Analogue Input Type | current (impedance 0.3 mOhm) voltage (impedance 5 MOhm) |
| Analogue Output Number | backlit LCD |
| Communication Gateway | 128 x 128 pixels |
| Display Resolution | 128 x 128 pixels |
| Memory Capacity | 256 kB |
| Number Of Inputs | 2 digital |
| Output Voltage | current (impedance 0.3 mOhm) voltage (impedance 5 MOhm) |
| Product Name | PowerLogic PM5000 |
| Time Delay | active energy +/- 0.5 % active power +/- 0.5 % apparent power +/- 0.5 % current +/- 0.5 % frequency +/- 0.05 % power factor +/- 0.005 reactive energy +/- 2 % voltage +/- 0.5 % |
| [In] Rated Current | 1 A 5 A |
| Accuracy Class | class 0.5S active energy conforming to IEC 62053-22 |
| Communication Port Support | Ethernet |
| Compatibility Code | PM5320 |
| Connections - Terminals | control circuit: screw terminal block2 current transformer: screw terminal block6 Ethernet network: RJ45 connector input/output circuit: screw terminal block6 relay output: screw terminal block4 voltage circuit: screw terminal block4 |
| Data Recording | alarm logs data logs event logs maintenance logs min/max of instantaneous values time stamping |
| Depth | 72 mm |
| Device Application | multi-tariff power monitoring |
| Frequency Measurement Range | 45-65 Hz |
| Height | 96 mm |
| Information Displayed | tariff (4) |
| Market Segment | buildings large building cost management: billing: main incomer buildings large building cost management: billing: sub feeder buildings large building cost management: cost allocation: main incomer buildings large building cost management: cost allocation: sub feeder buildings large building network management: sub feeder buildings medium building cost management: billing: main incomer buildings medium building cost management: billing: sub feeder buildings medium building cost management: cost allocation: main incomer buildings medium building cost management: cost allocation: sub feeder buildings medium building network management: main incomer buildings medium building network management: sub feeder buildings multi-site cost management: billing: main incomer buildings multi-site cost management: billing: sub feeder buildings multi-site cost management: cost allocation: main incomer buildings multi-site cost management: cost allocation: sub feeder buildings multi-site network management: sub feeder buildings small building cost management: billing: main incomer buildings small building cost management: billing: sub feeder buildings small building cost management: cost allocation: main incomer buildings small building cost management: cost allocation: sub feeder buildings small building network management: main incomer buildings small building network management: sub feeder data center cost management: billing: main incomer data center cost management: billing: sub feeder data center cost management: cost allocation: main incomer data center cost management: cost allocation: sub feeder data center network management: sub feeder healthcare cost management: billing: main incomer healthcare cost management: billing: sub feeder healthcare cost management: cost allocation: main incomer healthcare cost management: cost allocation: sub feeder healthcare network management: sub feeder industry cost management: billing: main incomer industry cost management: billing: sub feeder industry cost management: cost allocation: main incomer industry cost management: cost allocation: sub feeder industry network management: sub feeder |
| Maximum Power Consumption In VA | 10 VA at 415 V |
| Measurement Current | 10-9000 mA |
| Measurement Voltage | 20-400 V AC 45...65 Hz between phase and neutral 35-690 V AC 45...65 Hz between phases |
| Mounting Mode | flush-mounted |
| Net Weight | 430 g |
| Network Frequency | 50 Hz 60 Hz |
| Number Of Outputs | 2 digital |
| Ride-through Time | 100 ms 230 V AC typical 100 ms 415 V AC typical 80 ms 120 V AC typical |
| Sampling Rate | 64 samples/cycle |
| Width | 96 mm |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -25-70 °C |
| Ambient Air Temperature For Storage | -40-85 °C |
| Electromagnetic Compatibility | conducted and radiated emissions class B conforming to EN 55022 conducted RF disturbances level 3 conforming to IEC 61000-4-6 electrostatic discharge level 4 conforming to IEC 61000-4-2 limits for harmonic current emissions class A conforming to IEC 61000-3-2 magnetic field at power frequency level 4 conforming to IEC 61000-4-8 |
| IP Degree Of Protection | IP30 body: conforming to IEC 60529 IP52 front: conforming to IEC 60529 |
| Operating Altitude | 2000 m |
| Pollution Degree | 2 |
| Product Certifications | CE conforming to IEC 61010-1 cULus conforming to UL 61010-1 |
| Relative Humidity | 5-95 % at 50-50 °C |
| Standards | EN 50470-1 EN 50470-3 IEC 60529 IEC 61557-12 IEC 62053-22 IEC 62053-24 UL 61010-1 |
| OTHER | |
| Poles Description | 1P + N 3P 3P + N |
| [Us] Rated Supply Voltage | 100...415 V AC 45...65 Hz 125...250 V DC |
Write Your Own Review