LUB12 - Power Base, TeSys U, 3P, 12A/690V
Schneider
SKU
SE_LUB12
Model
LUB12
SGD $217.68 All prices inclusive of GST
Short description of LUB12
LUB12.
TeSys U standard power base, 3 poles (3NO), 12A/690V, to be completed with a control unit LUC to form a TeSys U starter controller, for 3-phase motor applications up to 5.5kW@400V. Base composed of power contacts, control coil, rotary handle, with a modular design for additional modules to form a "all in one" starter controller with basic or advanced protection and control functions. It is equipped with a control terminal block, and blanking shutters covering the empty cavities. It provides a high breaking capacity Icu 50kA@400V, start-stop control guaranteed for 3600 cycles/hour. Very compact (45mm width), DIN-rail mounting and screw fixing, with a padlockable rotary handle. Certified when used in conjunction with a LUC control unit (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
Country of Origin
France
power base
- TeSys U
- 12 A
- screw clamps control.
Label : TeSys U
- range of product : TeSys U
- suitability for isolation : yes
- [Ith] conventional free air thermal current : 12 A
- utilisation category : AC
- 44,AC
- 43,AC
- 41
- [Uc] control circuit voltage : 24 V AC 50/60 Hz, 24 V DC, 48 V AC 50/60 Hz, 48...72 V DC, 110...220 V DC, 110...240 V AC 50/60 Hz
- range : TeSys
- product name : TeSys U
- device short name : LUB
- product or component type : non reversing power base
- device application : motor
- poles description : 3P
- Range Presentation : With a capacity of up to 32A/15 kW, TeSys U consists of :
- One 45 mm power base (1) : 2 ratings, reversing or non
- reversing, circuit-breaker function and built-in interference suppression
- One clip-on control unit, from a choice of 3 : Standard CU : protection against overloads and short-circuits/Expandable CU : + alarm and fault differentiation/ Multifunction CU (2) : real time control of motor load, local or remote diagnostics and parameter setting
- One clip-on automation control module, from a choice of 3 : (3) : Modbus, CANopen, AS
- Interface and PROFIBUS DP, Ethernet, DeviceNet, Fipio, Interbus S via Advantys STB le module or a simple parallel link
- Two optional 45 mm power functions : limiter
- isolator(4) and changeover relay (5)
- Range Benefits : A motor starter simple and compact
Introducing the 1st intelligent starter capable of integrating motor control, control and changeover functions in a unit 45 mm wide! Compact, simple and modular, it adapts to all the applications.
- Range Application Presentation :
- Industry : ideal solution when the motor starter needs to be decentralised in the machine or the process
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- TeSys U
- 12 A
- screw clamps control.
Label : TeSys U
- range of product : TeSys U
- suitability for isolation : yes
- [Ith] conventional free air thermal current : 12 A
- utilisation category : AC
- 44,AC
- 43,AC
- 41
- [Uc] control circuit voltage : 24 V AC 50/60 Hz, 24 V DC, 48 V AC 50/60 Hz, 48...72 V DC, 110...220 V DC, 110...240 V AC 50/60 Hz
- range : TeSys
- product name : TeSys U
- device short name : LUB
- product or component type : non reversing power base
- device application : motor
- poles description : 3P
- Range Presentation : With a capacity of up to 32A/15 kW, TeSys U consists of :
- One 45 mm power base (1) : 2 ratings, reversing or non
- reversing, circuit-breaker function and built-in interference suppression
- One clip-on control unit, from a choice of 3 : Standard CU : protection against overloads and short-circuits/Expandable CU : + alarm and fault differentiation/ Multifunction CU (2) : real time control of motor load, local or remote diagnostics and parameter setting
- One clip-on automation control module, from a choice of 3 : (3) : Modbus, CANopen, AS
- Interface and PROFIBUS DP, Ethernet, DeviceNet, Fipio, Interbus S via Advantys STB le module or a simple parallel link
- Two optional 45 mm power functions : limiter
- isolator(4) and changeover relay (5)
- Range Benefits : A motor starter simple and compact
Introducing the 1st intelligent starter capable of integrating motor control, control and changeover functions in a unit 45 mm wide! Compact, simple and modular, it adapts to all the applications.
- Range Application Presentation :
- Industry : ideal solution when the motor starter needs to be decentralised in the machine or the process
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Breaking Capacity Code | 10 kA at 500 V 4 kA at 690 V 50 kA at 230 V 50 kA at 440 V |
| Control Type | 3P |
| Product Or Component Type | non reversing power base |
| Range Of Product | TeSys U |
| [Ie] Rated Operational Current | 12 A at <= 440 V 12 A at 500 V 9 A at 690 V |
| [Uc] Control Circuit Voltage | 110...220 V DC 110...240 V AC 50/60 Hz 24 V AC 50/60 Hz 24 V DC 48...72 V AC 50/60 Hz 48...72 V DC |
| [Ue] Rated Operational Voltage | 690 V AC for power circuit |
| Device Short Name | LUB |
| EAN13 | 3389110362770 |
| Range | TeSys |
| Range Name | TeSys U |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Suitability For Isolation | yes |
| Utilisation Category | AC-41 AC-43 AC-44 |
| COMPLEMENTARY | |
| Communication Network Type | 690 V AC for power circuit |
| Product Name | TeSys U |
| [Ics] Rated Service Breaking Capacity | 10 kA at 500 V 4 kA at 690 V 50 kA at 230 V 50 kA at 440 V |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Auxiliary Contacts Type | type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1 type mirror contact (1 NC) conforming to IEC 60947-1 |
| Compatibility Code | LUB |
| Connections - Terminals | control circuit: screw clamp terminals 1 cable(s) 0.34-1.5 mm² flexible with cable end control circuit: screw clamp terminals 1 cable(s) 0.75-1.5 mm² flexible without cable end control circuit: screw clamp terminals 1 cable(s) 0.75-1.5 mm² rigid control circuit: screw clamp terminals 2 cable(s) 0.34-1.5 mm² flexible with cable end control circuit: screw clamp terminals 2 cable(s) 0.75-1.5 mm² flexible without cable end control circuit: screw clamp terminals 2 cable(s) 0.75-1.5 mm² rigid power circuit: screw clamp terminals 1 cable(s) 1-10 mm² rigid power circuit: screw clamp terminals 1 cable(s) 1-6 mm² flexible with cable end power circuit: screw clamp terminals 1 cable(s) 2.5-10 mm² flexible without cable end power circuit: screw clamp terminals 2 cable(s) 1.5-6 mm² flexible without cable end power circuit: screw clamp terminals 2 cable(s) 1-6 mm² flexible with cable end power circuit: screw clamp terminals 2 cable(s) 1-6 mm² rigid |
| Depth | 126 mm |
| Device Application | motor control motor protection |
| Fixing Mode | clipped (DIN rail) screw-fixed (plate) |
| Height | 154 mm |
| Immunity To Microbreaks | 3 ms for control circuit |
| Maximum Operating Rate | 3600 cyc/h |
| Mechanical Durability | 15 Mcycles |
| Net Weight | 0.9 kg |
| Network Frequency | 40...60 Hz |
| Operating Time | 35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for control circuit 50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for control circuit 60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for control circuit 70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for control circuit 75 ms closing with LUCM for control circuit |
| Safe Separation Of Circuit | 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N 400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N |
| Tightening Torque | control circuit: 0.8-1.2 N.m flat screwdriver 5 mm control circuit: 0.8-1.2 N.m Philips no 1 screwdriver 5 mm power circuit: 1.9-2.5 N.m flat screwdriver 6 mm power circuit: 1.9-2.5 N.m Philips No 2 screwdriver 6 mm |
| Typical Current Consumption | 130 mA at 24 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD 140 mA at 24 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD 150 mA at 24 V DC I maximum while closing with LUCM 280 mA at 110...220 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD 280 mA at 110...240 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD 280 mA at 48...72 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD 280 mA at 48...72 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD 35 mA at 110...220 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD 35 mA at 110...240 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD 35 mA at 48...72 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD 35 mA at 48...72 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD 60 mA at 24 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD 70 mA at 24 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD 70 mA at 24 V DC I rms sealed with LUCM |
| Width | 45 mm |
| [Ith] Conventional Free Air Thermal Current | 12 A |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV conforming to IEC 60947-6-2 |
| [Ui] Rated Insulation Voltage | 600 V conforming to CSA C22.2 No 60947-4-1 600 V conforming to UL 60947-4-1 690 V conforming to IEC 60947-6-2 (pollution degree 3) |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -25-60 °C with LUCM -25-70 °C with LUCA, LUCB, LUCC, LUCD |
| Ambient Air Temperature For Storage | -40-85 °C |
| Fire Resistance | 650 °C conforming to IEC 60695-2-12 960 °C parts supporting live components conforming to IEC 60695-2-12 |
| Heat Dissipation | 1.7-1.7 W for control circuit with LUCM 2-2 W for control circuit with LUCA, LUCB, LUCC, LUCD |
| Immunity To Radioelectric Fields | 10 V conforming to IEC 61000-4-6 |
| Immunity To Voltage Dips | 70 % / 500 ms conforming to IEC 61000-4-11 |
| IP Degree Of Protection | IP20 conforming to IEC 60947-1 (front panel and wired terminals) IP20 conforming to IEC 60947-1 (other faces) IP40 conforming to IEC 60947-1 (front panel outside connection zone) |
| Non-dissipating Shock Wave | 1 kV serial mode 24...240 V AC conforming to IEC 60947-6-2 1 kV serial mode 48...220 V DC conforming to IEC 60947-6-2 2 kV common mode 24...240 V AC conforming to IEC 60947-6-2 2 kV common mode 48...220 V DC conforming to IEC 60947-6-2 |
| Operating Altitude | 2000 m |
| Product Certifications | ASEFA ATEX CCC CE CSA EAC Marine UL |
| Protective Treatment | TH conforming to IEC 60068 |
| Resistance To Electrostatic Discharge | 8 kV level 3 in open air conforming to IEC 61000-4-2 8 kV level 4 on contact conforming to IEC 61000-4-2 |
| Resistance To Fast Transients | 2 kV class 3 serial link conforming to IEC 61000-4-4 4 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 |
| Resistance To Radiated Fields | 10 V/m 3 conforming to IEC 61000-4-3 |
| Shock Resistance | 10 gn power poles open conforming to IEC 60068-2-27 15 gn power poles closed conforming to IEC 60068-2-27 |
| Standards | CSA C22.2 No 60947-4-1, with phase barrier EN 60947-6-2 IEC 60947-6-2 UL 60947-4-1, with phase barrier |
| Vibration Resistance | 2 gn (f= 5-300 Hz) power poles open conforming to IEC 60068-2-27 4 gn (f= 5-300 Hz) power poles closed conforming to IEC 60068-2-27 |
| OTHER | |
| Poles Description | 3P |
| [Us] Rated Supply Voltage | TeSys U |
Write Your Own Review