TeSys D Contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC Coil.
Schneider
SKU
SE_LC1D32BD
Model
LC1D32BD
SGD $119.42
Short description of LC1D32BD
Contactors to control motors up to 150 A (75 kW / 400 V)
Country of Origin
India
range : TeSys
- product name : TeSys D
- product or component type : Contactor
- device short name : LC1D
- contactor application : Resistive loadMotor control
- utilisation category : AC
- 3AC
- 1AC
- 4
- poles description : 3P
- power pole contact composition : 3 NO
- [Ue] rated operational voltage : Power circuit- [Ie] rated operational current : 32 A (at - motor power kW : 7.5 kW at 220...230 V AC 50/60 Hz (AC
- 3)15 kW at 380...400 V AC 50/60 Hz (AC
- 3)15 kW at 415...440 V AC 50/60 Hz (AC
- 3)18.5 kW at 500 V AC 50/60 Hz (AC
- 3)18.5 kW at 660...690 V AC 50/60 Hz (AC
- 3)7.5 kW at 400 V AC 50/60 Hz (AC
- 4)
- motor power HP (UL / CSA) : 2 hp at 115 V AC 50/60 Hz for 1 phase motors5 hp at 230/240 V AC 50/60 Hz for 1 phase motors7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors10 hp at 230/240 V AC 50/60 Hz for 3 phases motors20 hp at 460/480 V AC 50/60 Hz for 3 phases motors30 hp at 575/600 V AC 50/60 Hz for 3 phases motors
- control circuit type : DC standard
- [Uc] control circuit voltage : 24 V DC
- auxiliary contact composition : 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
- overvoltage category : III
- [Ith] conventional free air thermal current : 10 A (at 60 °C) for signalling circuit50 A (at 60 °C) for power circuit
- Irms rated making capacity : 140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1550 A at 440 V for power circuit conforming to IEC 60947
- rated breaking capacity : 550 A at 440 V for power circuit conforming to IEC 60947
- [Icw] rated short
- time withstand current : 260 A 40 °C
- 10 s for power circuit430 A 40 °C
- 1 s for power circuit60 A 40 °C
- 10 min for power circuit138 A 40 °C
- 1 min for power circuit100 A
- 1 s for signalling circuit120 A
- 500 ms for signalling circuit140 A
- 100 ms for signalling circuit
- associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-163 A gG at - average impedance : 2 mOhm
- Ith 50 A 50 Hz for power circuit
- [Ui] rated insulation voltage : Power circuit : 690 V conforming to IEC 60947-4-1Power circuit : 600 V CSA certifiedPower circuit : 600 V UL certifiedSignalling circuit : 690 V conforming to IEC 60947-1Signalling circuit : 600 V CSA certifiedSignalling circuit : 600 V UL certified
- electrical durability : 1.65 Mcycles 32 A AC
- 3 at Ue
- power dissipation per pole : 2 W AC
- 35 W AC
- 1
- Front cover : With
- mounting support : RailPlate
- standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
- product certifications : DNVGLCCCULGOSTBVLROS (Lloyds register of shipping)RINACSA
- connections
- terminals : Control circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit : screw clamp terminals 1 cable(s) 2.5…10 mm²flexible without cable endPower circuit : screw clamp terminals 2 cable(s) 2.5…10 mm²flexible without cable endPower circuit : screw clamp terminals 1 cable(s) 1…10 mm²flexible with cable endPower circuit : screw clamp terminals 2 cable(s) 1.5…6 mm²flexible with cable endPower circuit : screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable endPower circuit : screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
- tightening torque : Control circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmControl circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2Power circuit : 2.5 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmPower circuit : 2.5 N.m
- on screw clamp terminals
- with screwdriver Philips No 2
- operating time : 53.55...72.45 ms closing16...24 ms opening
- safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
- mechanical durability : 30 Mcycles
- maximum operating rate : 3600 cyc/h 60 °C
- product name : TeSys D
- product or component type : Contactor
- device short name : LC1D
- contactor application : Resistive loadMotor control
- utilisation category : AC
- 3AC
- 1AC
- 4
- poles description : 3P
- power pole contact composition : 3 NO
- [Ue] rated operational voltage : Power circuit- [Ie] rated operational current : 32 A (at - motor power kW : 7.5 kW at 220...230 V AC 50/60 Hz (AC
- 3)15 kW at 380...400 V AC 50/60 Hz (AC
- 3)15 kW at 415...440 V AC 50/60 Hz (AC
- 3)18.5 kW at 500 V AC 50/60 Hz (AC
- 3)18.5 kW at 660...690 V AC 50/60 Hz (AC
- 3)7.5 kW at 400 V AC 50/60 Hz (AC
- 4)
- motor power HP (UL / CSA) : 2 hp at 115 V AC 50/60 Hz for 1 phase motors5 hp at 230/240 V AC 50/60 Hz for 1 phase motors7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors10 hp at 230/240 V AC 50/60 Hz for 3 phases motors20 hp at 460/480 V AC 50/60 Hz for 3 phases motors30 hp at 575/600 V AC 50/60 Hz for 3 phases motors
- control circuit type : DC standard
- [Uc] control circuit voltage : 24 V DC
- auxiliary contact composition : 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
- overvoltage category : III
- [Ith] conventional free air thermal current : 10 A (at 60 °C) for signalling circuit50 A (at 60 °C) for power circuit
- Irms rated making capacity : 140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1550 A at 440 V for power circuit conforming to IEC 60947
- rated breaking capacity : 550 A at 440 V for power circuit conforming to IEC 60947
- [Icw] rated short
- time withstand current : 260 A 40 °C
- 10 s for power circuit430 A 40 °C
- 1 s for power circuit60 A 40 °C
- 10 min for power circuit138 A 40 °C
- 1 min for power circuit100 A
- 1 s for signalling circuit120 A
- 500 ms for signalling circuit140 A
- 100 ms for signalling circuit
- associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-163 A gG at - average impedance : 2 mOhm
- Ith 50 A 50 Hz for power circuit
- [Ui] rated insulation voltage : Power circuit : 690 V conforming to IEC 60947-4-1Power circuit : 600 V CSA certifiedPower circuit : 600 V UL certifiedSignalling circuit : 690 V conforming to IEC 60947-1Signalling circuit : 600 V CSA certifiedSignalling circuit : 600 V UL certified
- electrical durability : 1.65 Mcycles 32 A AC
- 3 at Ue
- power dissipation per pole : 2 W AC
- 35 W AC
- 1
- Front cover : With
- mounting support : RailPlate
- standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
- product certifications : DNVGLCCCULGOSTBVLROS (Lloyds register of shipping)RINACSA
- connections
- terminals : Control circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit : screw clamp terminals 1 cable(s) 2.5…10 mm²flexible without cable endPower circuit : screw clamp terminals 2 cable(s) 2.5…10 mm²flexible without cable endPower circuit : screw clamp terminals 1 cable(s) 1…10 mm²flexible with cable endPower circuit : screw clamp terminals 2 cable(s) 1.5…6 mm²flexible with cable endPower circuit : screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable endPower circuit : screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
- tightening torque : Control circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmControl circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2Power circuit : 2.5 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmPower circuit : 2.5 N.m
- on screw clamp terminals
- with screwdriver Philips No 2
- operating time : 53.55...72.45 ms closing16...24 ms opening
- safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
- mechanical durability : 30 Mcycles
- maximum operating rate : 3600 cyc/h 60 °C
| MAIN SPECIFICATIONS | |
|---|---|
| Control Type | 3P |
| Product Or Component Type | contactor |
| Range Of Product | TeSys D TeSys Deca |
| [Ie] Rated Operational Current | 32 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 32 A (at <60 °C) at <= 440 V AC AC-3e for power circuit 50 A (at <60 °C) at <= 440 V AC AC-1 for power circuit |
| [Uc] Control Circuit Voltage | 24 V DC |
| [Ue] Rated Operational Voltage | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
| Average Impedance | 2 mOhm - Ith 50 A 50 Hz for power circuit |
| Contactor Application | motor control resistive load |
| Control Circuit Type | DC standard |
| Device Short Name | LC1D LC1D32 |
| Motor Power Hp | 10 hp at 230/240 V AC 50/60 Hz for 3 phases motors 2 hp at 115 V AC 50/60 Hz for 1 phase motors 20 hp at 460/480 V AC 50/60 Hz for 3 phases motors 30 hp at 575/600 V AC 50/60 Hz for 3 phases motors 5 hp at 230/240 V AC 50/60 Hz for 1 phase motors 7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors |
| Mounting Support | plate rail |
| Pole Contact Composition | 3 NO |
| Power Dissipation Per Pole | 2 W AC-3 2 W AC-3e 5 W AC-1 |
| Protective Cover | with |
| Range | TeSys TeSys Deca |
| Range Name | TeSys D |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Utilisation Category | AC-1 AC-3 AC-3e AC-4 |
| COMPLEMENTARY | |
| Communication Network Type | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
| Product Name | TeSys D TeSys Deca |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 63 A gG at <= 690 V coordination type 1 for power circuit 63 A gG at <= 690 V coordination type 2 for power circuit |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Auxiliary Contacts Type | type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 |
| Coil Technology | built-in bidirectional peak limiting diode suppressor |
| Compatibility Code | LC1D |
| Connections - Terminals | control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end power circuit: screw clamp terminals 1 cable(s) 1.5-10 mm²solid without cable end power circuit: screw clamp terminals 1 cable(s) 1-10 mm²flexible with cable end power circuit: screw clamp terminals 1 cable(s) 2.5-10 mm²flexible without cable end power circuit: screw clamp terminals 2 cable(s) 1.5-6 mm²flexible with cable end power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²flexible without cable end power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²solid without cable end |
| Contact Compatibility | M4 |
| Contactor Coil Voltage | 24 V DC standard |
| Control Circuit Voltage Limits | 0.1...0.25 Uc (-40-70 °C):drop-out DC 0.7...1.25 Uc (-40-60 °C):operational DC 1...1.25 Uc (60-70 °C):operational DC |
| Depth | 101 mm |
| Electrical Durability | 1.4 Mcycles 50 A AC-1 at Ue <= 440 V 1.65 Mcycles 32 A AC-3 at Ue <= 440 V 1.65 Mcycles 32 A AC-3e at Ue <= 440 V |
| Flame Retardance | V1 conforming to UL 94 |
| Height | 85 mm |
| Hold-in Power Consumption In W | 5.4-5.4 W at 20 °C |
| Inrush Power In W | 5.4-5.4 W (at 20 °C) |
| Insulation Resistance | > 10 MOhm for signalling circuit |
| Irms Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 550 A at 440 V for power circuit conforming to IEC 60947 |
| Maximum Operating Rate | 3600 cyc/h 60 °C |
| Mechanical Durability | 30 Mcycles |
| Mechanical Robustness | shocks contactor closed: 15 Gn for 11 ms shocks contactor open: 8 Gn for 11 ms vibrations contactor closed: 4 Gn, 5...300 Hz vibrations contactor open: 2 Gn, 5...300 Hz |
| Minimum Switching Current | 5 mA for signalling circuit |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Motor Power KW | 15 kW at 380...400 V AC 50/60 Hz (AC-3) 15 kW at 380...400 V AC 50/60 Hz (AC-3e) 15 kW at 415...440 V AC 50/60 Hz (AC-3) 15 kW at 415...440 V AC 50/60 Hz (AC-3e) 18.5 kW at 500 V AC 50/60 Hz (AC-3) 18.5 kW at 500 V AC 50/60 Hz (AC-3e) 18.5 kW at 660...690 V AC 50/60 Hz (AC-3) 18.5 kW at 660...690 V AC 50/60 Hz (AC-3e) 7.5 kW at 220...230 V AC 50/60 Hz (AC-3) 7.5 kW at 220...230 V AC 50/60 Hz (AC-3e) 7.5 kW at 400 V AC 50/60 Hz (AC-4) |
| Motor Starter Type | direct on-line contactor |
| Net Weight | 0.535 kg |
| Non-overlap Time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
| Operating Time | 16...24 ms opening 53.55...72.45 ms closing |
| Power Range | 15-25 kW at 380-440 V 3 phases 15-25 kW at 480-500 V 3 phases 7-11 kW at 200-240 V 3 phases |
| Rated Breaking Capacity | 550 A at 440 V for power circuit conforming to IEC 60947 |
| Signalling Circuit Frequency | 25...400 Hz |
| Tightening Torque | control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2 power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 |
| Time Constant | 28 ms |
| Width | 45 mm |
| [Icw] Rated Short-time Withstand Current | 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 138 A 40 °C - 1 min for power circuit 140 A - 100 ms for signalling circuit 260 A 40 °C - 10 s for power circuit 430 A 40 °C - 1 s for power circuit 60 A 40 °C - 10 min for power circuit |
| [Ith] Conventional Free Air Thermal Current | 10 A (at 60 °C) for signalling circuit 50 A (at 60 °C) for power circuit |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV conforming to IEC 60947 |
| [Ui] Rated Insulation Voltage | power circuit: 600 V CSA certified power circuit: 600 V UL certified power circuit: 690 V conforming to IEC 60947-4-1 signalling circuit: 600 V CSA certified signalling circuit: 600 V UL certified signalling circuit: 690 V conforming to IEC 60947-1 |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -40-60 °C 60-70 °C with derating |
| Ambient Air Temperature For Storage | -60-80 °C |
| Fire Resistance | 850 °C conforming to IEC 60695-2-1 |
| IP Degree Of Protection | IP20 front face conforming to IEC 60529 |
| Operating Altitude | 0...3000 m |
| Overvoltage Category | III |
| Pollution Degree | 3 |
| Product Certifications | BV CCC CSA DNV GL GOST LROS (Lloyds register of shipping) RINA UKCA UL |
| Protective Treatment | TH conforming to IEC 60068-2-30 |
| Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60335-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
| OTHER | |
| Poles Description | 3P |
| [Us] Rated Supply Voltage | TeSys D TeSys Deca |
Write Your Own Review