LC1D09P7 TeSys D Contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A
Schneider
SKU
SE_LC1D09P7
Model
LC1D09P7
Special Price SGD $22.48 Regular Price SGD $27.95 All prices inclusive of GST
Short description of LC1D09P7
Contactors to control motors up to 150 A (75 kW / 400 V) CTR Promo
TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). It provides a 230V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability to demanding applications. Compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
Country of Origin
India
range : TeSys
- product name : TeSys D
- product or component type : Contactor
- device short name : LC1D
- contactor application : Resistive loadMotor control
- utilisation category : AC
- 4AC
- 1AC
- 3
- poles description : 3P
- power pole contact composition : 3 NO
- [Ue] rated operational voltage : Power circuit- [Ie] rated operational current : 9 A (at - motor power kW : 2.2 kW at 220...230 V AC 50/60 Hz (AC
- 3)4 kW at 380...400 V AC 50/60 Hz (AC
- 3)4 kW at 415...440 V AC 50/60 Hz (AC
- 3)5.5 kW at 500 V AC 50/60 Hz (AC
- 3)5.5 kW at 660...690 V AC 50/60 Hz (AC
- 3)2.2 kW at 400 V AC 50/60 Hz (AC
- 4)
- motor power HP (UL / CSA) : 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors2 hp at 200/208 V AC 50/60 Hz for 3 phases motors2 hp at 230/240 V AC 50/60 Hz for 3 phases motors5 hp at 460/480 V AC 50/60 Hz for 3 phases motors7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors0.33 hp at 115 V AC 50/60 Hz for 1 phase motors
- control circuit type : AC at 50/60 Hz
- [Uc] control circuit voltage : 230 V AC 50/60 Hz
- auxiliary contact composition : 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
- overvoltage category : III
- [Ith] conventional free air thermal current : 25 A (at 60 °C) for power circuit10 A (at 60 °C) for signalling circuit
- Irms rated making capacity : 250 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1
- rated breaking capacity : 250 A at 440 V for power circuit conforming to IEC 60947
- [Icw] rated short
- time withstand current : 105 A 40 °C
- 10 s for power circuit210 A 40 °C
- 1 s for power circuit30 A 40 °C
- 10 min for power circuit61 A 40 °C
- 1 min for power circuit100 A
- 1 s for signalling circuit120 A
- 500 ms for signalling circuit140 A
- 100 ms for signalling circuit
- associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-125 A gG at - average impedance : 2.5 mOhm
- Ith 25 A 50 Hz for power circuit
- [Ui] rated insulation voltage : Power circuit : 690 V conforming to IEC 60947-4-1Power circuit : 600 V CSA certifiedPower circuit : 600 V UL certifiedSignalling circuit : 690 V conforming to IEC 60947-1Signalling circuit : 600 V CSA certifiedSignalling circuit : 600 V UL certified
- electrical durability : 0.6 Mcycles 25 A AC
- 1 at Ue
- power dissipation per pole : 1.56 W AC
- 10.2 W AC
- 3
- Front cover : With
- mounting support : RailPlate
- standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
- product certifications : GOSTBVLROS (Lloyds register of shipping)DNVCSARINACCCULGL
- connections
- terminals : Power circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endPower circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endPower circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endPower circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endPower circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endPower circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
- tightening torque : Power circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmPower circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2Control circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmControl circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2
- operating time : 12...22 ms closing4...19 ms opening
- safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
- mechanical durability : 15 Mcycles
- maximum operating rate : 3600 cyc/h 60 °C
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- product name : TeSys D
- product or component type : Contactor
- device short name : LC1D
- contactor application : Resistive loadMotor control
- utilisation category : AC
- 4AC
- 1AC
- 3
- poles description : 3P
- power pole contact composition : 3 NO
- [Ue] rated operational voltage : Power circuit- [Ie] rated operational current : 9 A (at - motor power kW : 2.2 kW at 220...230 V AC 50/60 Hz (AC
- 3)4 kW at 380...400 V AC 50/60 Hz (AC
- 3)4 kW at 415...440 V AC 50/60 Hz (AC
- 3)5.5 kW at 500 V AC 50/60 Hz (AC
- 3)5.5 kW at 660...690 V AC 50/60 Hz (AC
- 3)2.2 kW at 400 V AC 50/60 Hz (AC
- 4)
- motor power HP (UL / CSA) : 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors2 hp at 200/208 V AC 50/60 Hz for 3 phases motors2 hp at 230/240 V AC 50/60 Hz for 3 phases motors5 hp at 460/480 V AC 50/60 Hz for 3 phases motors7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors0.33 hp at 115 V AC 50/60 Hz for 1 phase motors
- control circuit type : AC at 50/60 Hz
- [Uc] control circuit voltage : 230 V AC 50/60 Hz
- auxiliary contact composition : 1 NO + 1 NC
- [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
- overvoltage category : III
- [Ith] conventional free air thermal current : 25 A (at 60 °C) for power circuit10 A (at 60 °C) for signalling circuit
- Irms rated making capacity : 250 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1
- rated breaking capacity : 250 A at 440 V for power circuit conforming to IEC 60947
- [Icw] rated short
- time withstand current : 105 A 40 °C
- 10 s for power circuit210 A 40 °C
- 1 s for power circuit30 A 40 °C
- 10 min for power circuit61 A 40 °C
- 1 min for power circuit100 A
- 1 s for signalling circuit120 A
- 500 ms for signalling circuit140 A
- 100 ms for signalling circuit
- associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-125 A gG at - average impedance : 2.5 mOhm
- Ith 25 A 50 Hz for power circuit
- [Ui] rated insulation voltage : Power circuit : 690 V conforming to IEC 60947-4-1Power circuit : 600 V CSA certifiedPower circuit : 600 V UL certifiedSignalling circuit : 690 V conforming to IEC 60947-1Signalling circuit : 600 V CSA certifiedSignalling circuit : 600 V UL certified
- electrical durability : 0.6 Mcycles 25 A AC
- 1 at Ue
- power dissipation per pole : 1.56 W AC
- 10.2 W AC
- 3
- Front cover : With
- mounting support : RailPlate
- standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
- product certifications : GOSTBVLROS (Lloyds register of shipping)DNVCSARINACCCULGL
- connections
- terminals : Power circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endPower circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endPower circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endPower circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endPower circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endPower circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit : screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit : screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit : screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
- tightening torque : Power circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmPower circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2Control circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver flat Ø 6 mmControl circuit : 1.7 N.m
- on screw clamp terminals
- with screwdriver Philips No 2
- operating time : 12...22 ms closing4...19 ms opening
- safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
- mechanical durability : 15 Mcycles
- maximum operating rate : 3600 cyc/h 60 °C
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Control Type | 3P |
| Product Or Component Type | contactor |
| Range Of Product | TeSys D TeSys Deca |
| [Ie] Rated Operational Current | 25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit 9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 9 A (at <60 °C) at <= 440 V AC AC-3e for power circuit |
| [Uc] Control Circuit Voltage | 230 V AC 50/60 Hz |
| [Ue] Rated Operational Voltage | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
| Average Impedance | 2.5 mOhm - Ith 25 A 50 Hz for power circuit |
| Contactor Application | motor control resistive load |
| Control Circuit Type | AC at 50/60 Hz |
| Device Short Name | LC1D |
| Motor Power Hp | 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors 2 hp at 200/208 V AC 50/60 Hz for 3 phases motors 2 hp at 230/240 V AC 50/60 Hz for 3 phases motors 5 hp at 460/480 V AC 50/60 Hz for 3 phases motors 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors |
| Mounting Support | plate rail |
| Pole Contact Composition | 3 NO |
| Power Dissipation Per Pole | 0.2 W AC-3 0.2 W AC-3e 1.56 W AC-1 |
| Protective Cover | with |
| Range | TeSys TeSys Deca |
| Range Name | TeSys D |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Utilisation Category | AC-1 AC-3 AC-3e AC-4 |
| COMPLEMENTARY | |
| Communication Network Type | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
| Product Name | TeSys D TeSys Deca |
| Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 20 A gG at <= 690 V coordination type 2 for power circuit 25 A gG at <= 690 V coordination type 1 for power circuit |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| Auxiliary Contacts Type | type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 |
| Coil Technology | without built-in suppressor module |
| Compatibility Code | LC1D |
| Connections - Terminals | control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end power circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end power circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end power circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end power circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end power circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end power circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end |
| Contact Compatibility | M2 |
| Contactor Coil Voltage | 230 V AC standard |
| Control Circuit Voltage Limits | 0.3...0.6 Uc (-40-70 °C):drop-out AC 50/60 Hz 0.8...1.1 Uc (-40-60 °C):operational AC 50 Hz 0.85...1.1 Uc (-40-60 °C):operational AC 60 Hz 1...1.1 Uc (60-70 °C):operational AC 50/60 Hz |
| Depth | 86 mm |
| Electrical Durability | 0.6 Mcycles 25 A AC-1 at Ue <= 440 V 2 Mcycles 9 A AC-3 at Ue <= 440 V 2 Mcycles 9 A AC-3e at Ue <= 440 V |
| Flame Retardance | V1 conforming to UL 94 |
| Height | 77 mm |
| Hold-in Power Consumption In VA | 7.5-7.5 VA 60 Hz cos phi 0.3 (at 20 °C) 7-7 VA 50 Hz cos phi 0.3 (at 20 °C) |
| Inrush Power In VA | 70-70 VA 50 Hz cos phi 0.75 (at 20 °C) 70-70 VA 60 Hz cos phi 0.75 (at 20 °C) |
| Insulation Resistance | > 10 MOhm for signalling circuit |
| Irms Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A at 440 V for power circuit conforming to IEC 60947 250 A DC for signalling circuit conforming to IEC 60947-5-1 |
| Maximum Operating Rate | 3600 cyc/h 60 °C |
| Mechanical Durability | 15 Mcycles |
| Mechanical Robustness | shocks contactor closed: 15 Gn for 11 ms shocks contactor open: 10 Gn for 11 ms vibrations contactor closed: 4 Gn, 5...300 Hz vibrations contactor open: 2 Gn, 5...300 Hz |
| Minimum Switching Current | 5 mA for signalling circuit |
| Minimum Switching Voltage | 17 V for signalling circuit |
| Motor Power KW | 2.2 kW at 220...230 V AC 50/60 Hz (AC-3) 2.2 kW at 220...230 V AC 50/60 Hz (AC-3e) 2.2 kW at 400 V AC 50/60 Hz (AC-4) 4 kW at 380...400 V AC 50/60 Hz (AC-3) 4 kW at 380...400 V AC 50/60 Hz (AC-3e) 4 kW at 415...440 V AC 50/60 Hz (AC-3) 4 kW at 415...440 V AC 50/60 Hz (AC-3e) 5.5 kW at 500 V AC 50/60 Hz (AC-3) 5.5 kW at 500 V AC 50/60 Hz (AC-3e) 5.5 kW at 660...690 V AC 50/60 Hz (AC-3) 5.5 kW at 660...690 V AC 50/60 Hz (AC-3e) |
| Motor Starter Type | direct on-line contactor |
| Net Weight | 0.32 kg |
| Non-overlap Time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
| Operating Time | 12...22 ms closing 4...19 ms opening |
| Power Range | 1.1-2 kW at 200-240 V 3 phases 2.2-3 kW at 380-440 V 3 phases 4-6 kW at 380-440 V 3 phases 4-6 kW at 480-500 V 3 phases |
| Rated Breaking Capacity | 250 A at 440 V for power circuit conforming to IEC 60947 |
| Signalling Circuit Frequency | 25...400 Hz |
| Tightening Torque | control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 |
| Width | 45 mm |
| [Icw] Rated Short-time Withstand Current | 100 A - 1 s for signalling circuit 105 A 40 °C - 10 s for power circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit 210 A 40 °C - 1 s for power circuit 30 A 40 °C - 10 min for power circuit 61 A 40 °C - 1 min for power circuit |
| [Ith] Conventional Free Air Thermal Current | 10 A (at 60 °C) for signalling circuit 25 A (at 60 °C) for power circuit |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV conforming to IEC 60947 |
| [Ui] Rated Insulation Voltage | power circuit: 600 V CSA certified power circuit: 600 V UL certified power circuit: 690 V conforming to IEC 60947-4-1 signalling circuit: 600 V CSA certified signalling circuit: 600 V UL certified signalling circuit: 690 V conforming to IEC 60947-1 |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -40-60 °C 60-70 °C with derating |
| Ambient Air Temperature For Storage | -60-80 °C |
| Fire Resistance | 850 °C conforming to IEC 60695-2-1 |
| Heat Dissipation | 2-3 W at 50/60 Hz |
| IP Degree Of Protection | IP20 front face conforming to IEC 60529 |
| Operating Altitude | 0...3000 m |
| Overvoltage Category | III |
| Pollution Degree | 3 |
| Product Certifications | BV CCC CSA DNV GL GOST LROS (Lloyds register of shipping) RINA UKCA UL |
| Protective Treatment | TH conforming to IEC 60068-2-30 |
| Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60335-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
| OTHER | |
| Poles Description | 3P |
| [Us] Rated Supply Voltage | TeSys D TeSys Deca |
Write Your Own Review