ATV310HU40N4E - Variable Speed Drive ATV310, 4 KW, 5.5 Hp, 380...460 V, 3 Phase.
Schneider
SKU
SE_ATV310HU40N4E
Model
ATV310HU40N4E
SGD $582.65 All prices inclusive of GST
Short description of ATV310HU40N4E
ATV310HU40N4E. Optimized drives for machines from 0.37 to 11 kW
Country of Origin
Indonesia
range of product : Easy Altivar 310
- product or component type : Variable speed drive
- product specific application : Simple machine
- assembly style : With heat sink
- device short name : ATV310
- network number of phases : Three phase
- [Us] rated supply voltage : 380...460 V
- 15...10 %
- motor power kW : 4 kW
- motor power hp : 5.5 hp
- noise level : 50 dB
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- product or component type : Variable speed drive
- product specific application : Simple machine
- assembly style : With heat sink
- device short name : ATV310
- network number of phases : Three phase
- [Us] rated supply voltage : 380...460 V
- 15...10 %
- motor power kW : 4 kW
- motor power hp : 5.5 hp
- noise level : 50 dB
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Analog/digital Conversion | AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits |
| Analogue Input Number | 1 |
| Analogue Input Range | 1 |
| Discrete Input Number | 4 |
| Discrete Output Type | logic output LO+, LO- protected relay output R1A, R1B, R1C 1 C/O |
| Display Type | 2-wire RS 485 for Modbus |
| Measurement Accuracy | RJ45 (on front face) for Modbus |
| Physical Interface | 2-wire RS 485 for Modbus |
| Product Or Component Type | variable speed drive |
| Range Of Product | Easy Altivar 310 |
| Communication Port Protocol | Modbus |
| Device Short Name | ATV310 |
| EMC Filter | without EMC filter |
| Line Current | 11.4 A |
| Motor Power Hp | 5.5 hp |
| Network Number Of Phases | three phase |
| Product Specific Application | simple machine |
| Range Name | Altivar Easy 310 |
| Speed Range | 1-20 |
| COMPLEMENTARY | |
| Analogue Input Type | configurable current AI1 0...20 mA 250 Ohm configurable voltage AI1 0...10 V 30 kOhm configurable voltage AI1 0...5 V 30 kOhm |
| Analogue Output Number | 1 |
| Analogue Output Type | AO1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 8 bits AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits |
| Connector Type | RJ45 (on front face) for Modbus |
| Discrete Output Number | 2 |
| Output Voltage | 380...460 V three phase |
| Port Ethernet | 2 |
| [Ics] Rated Service Breaking Capacity | logic output LO+, LO- protected relay output R1A, R1B, R1C 1 C/O |
| Acceleration And Deceleration Ramps | linear from 0...999.9 s S |
| Apparent Power | 9.1 kVA |
| Assembly Style | with heat sink |
| Asynchronous Motor Control Profile | energy saving ratio quadratic voltage/frequency ratio sensorless flux vector control |
| Braking To Standstill | by DC injection, <30 s |
| Braking Torque | up to 150 % of nominal motor torque with braking resistor at high inertia up to 70 % of nominal motor torque without braking resistor |
| Communication Service | read device identification (43) read holding registers (03) 29 words read/write multiple registers (23) 4/4 words write multiple registers (16) 27 words write single register (06) 29 words |
| Continuous Output Current | 9.5 A at 4 kHz |
| Depth | 184 mm |
| Discrete Input Logic | negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm positive logic (source), 0...< 5 V (state 0), > 11 V (state 1) |
| Discrete Input Type | programmable LI1...LI4 24 V 18...30 V |
| Electrical Connection | terminal, clamping capacity: 2.5...4 mm² (L1, L2, L3, PA/+, PB, U, V, W) |
| Frequency Resolution | analog input: converter A/D, 10 bits display unit: 0.1 Hz |
| Height | 151 mm |
| Insulation | electrical between power and control |
| Linearity Error | +/- 0.3 % of maximum value for analogue input |
| Maximum Switching Current | 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
| Maximum Transient Current | 14.3 A for 60 s |
| Minimum Switching Current | 5 mA at 24 V DC for logic relay |
| Motor Power KW | 4 kW |
| Motor Slip Compensation | adjustable |
| Net Weight | 1.8 kg |
| Nominal Switching Frequency | 4 kHz |
| Number Of Addresses | 1-247 for Modbus |
| Operating Position | vertical +/- 10 degree |
| Power Dissipation In W | 102.72 W at In |
| Product Destination | asynchronous motors |
| Prospective Line Isc | 5 kA |
| Protection Type | against input phase loss in three-phase line supply overvoltage line supply undervoltage overcurrent between output phases and earth overheating protection short-circuit between motor phases thermal motor protection via the drive by continuous calculation of I²t |
| Quantity Per Set | set of 1 |
| Sampling Duration | 10 ms for analogue input 20 ms, tolerance +/- 1 ms for logic input |
| Speed Drive Output Frequency | 0.5-400 Hz |
| Supply | internal supply for logic inputs: 24 V (20.4-28.8 V)DC, <100 mA with overload and short-circuit protection internal supply for reference potentiometer: 5 V (4.75-5.25 V)DC, <10 mA with overload and short-circuit protection |
| Supply Frequency | 50/60 Hz +/- 5 % |
| Switching Frequency | 2...12 kHz adjustable |
| Tightening Torque | 1.2-1.4 N.m |
| Time Constant | 20 ms +/- 1 ms for reference change |
| Transient Overtorque | 170-200 % of nominal motor torque depending on drive rating and type of motor |
| Transmission Frame | RTU for Modbus |
| Transmission Rate | 19200 bit/s 38400 bit/s 4800 bit/s 9600 bit/s |
| Type Of Cooling | integrated fan |
| Width | 140 mm |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -10-55 °C without derating 55-60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C |
| Ambient Air Temperature For Storage | -25-70 °C |
| Electromagnetic Compatibility | electrical fast transient/burst immunity test - test level: level 4 conforming to EN/IEC 61000-4-4 electrostatic discharge immunity test - test level: level 3 conforming to EN/IEC 61000-4-2 immunity to conducted disturbances - test level: level 3 conforming to EN/IEC 61000-4-6 radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to EN/IEC 61000-4-3 surge immunity test - test level: level 3 conforming to EN/IEC 61000-4-5 voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11 |
| Environmental Characteristic | chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3 |
| IP Degree Of Protection | IP20 without blanking plate on upper part IP41 top |
| Noise Level | 50 dB |
| Operating Altitude | <= 1000 m without derating |
| Pollution Degree | 2 conforming to EN/IEC 61800-5-1 |
| Relative Humidity | 5-95 % without condensation conforming to IEC 60068-2-3 5-95 % without dripping water conforming to IEC 60068-2-3 |
| Shock Resistance | 15 gn conforming to EN/IEC 60068-2-27 for 11 ms |
| Standards | EN/IEC 61800-3 EN/IEC 61800-5-1 |
| OTHER | |
| Poles Description | variable speed drive |
| [Us] Rated Supply Voltage | 380...460 V - 15...10 % |
Write Your Own Review