1123610000 - TRZ 24VDC 2CO
Weidmuller
SKU
WR_1123610000
Model
1123610000
SGD $147.15 All prices inclusive of GST
Short description of 1123610000
1123610000 - TRZ 24VDC 2CO - TERMSERIES, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V DC ±20 %, Continuous current: 8 A, Tension-clamp connection, Test button available: No
| GENERAL ORDERING DATA | |
|---|---|
| Version | TERMSERIES, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V DC ±20 %, Continuous current: 8 A, Tension-clamp connection, Test button available: No |
| Order No. | 1123610000 |
| Type | TRZ 24VDC 2CO |
| GTIN (EAN) | 4032248905959 |
| Qty. | 10 items |
| DIMENSIONS AND WEIGHTS | |
| Depth | 87.8 mm |
| Depth (inches) | 3.457 inch |
| Height | 90.5 mm |
| Height (inches) | 3.563 inch |
| Width | 12.8 mm |
| Width (inches) | 0.504 inch |
| Net Weight | 55.8 g |
| TEMPERATURES | |
| Storage Temperature | -40 °C...85 °C |
| Operating Temperature | -40 °C...60 °C |
| Humidity | 5-95% relative humidity, Tu = 40°C, without condensation |
| ENVIRONMENTAL PRODUCT COMPLIANCE | |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if Applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9 |
| RATED DATA UL | |
| Ambient Temperature (operational), Max. | 60 °C |
| Connection Cross-section AWG, Min. | AWG 26 |
| Connection Cross-section AWG, Max. | AWG 14 |
| Type Of Conductor | rigid copper conductor
flexible copper conductor |
| Pollution Severity Level | 2 |
| CONTROL SIDE | |
| Rated Control Voltage | 24 V DC ±20 % |
| Rated Current DC | 20.5 mA |
| Power Rating | 495 mW |
| Status Indicator | Green LED |
| Protective Circuit | Free-wheeling diode
Reverse polarity protection |
| Coil Voltage Of The Replacement Relay Deviating From The Rated Control Voltage | No |
| Coil Voltage Of The Replacement Relay | 24 V DC |
| LOAD SIDE | |
| Rated Switching Voltage | 250 V AC |
| Continuous Current | 8 A |
| Max. Switching Frequency At Rated Load | 0.1 Hz |
| Max. Switching Voltage, AC | 250 V |
| Max. Switching Voltage, DC | 250 V |
| Min. Switching Power | 1 mA @ 24 V
10 mA @ 10 V 100 mA @ 5 V |
| Inrush Current | 15 A / 4 s |
| AC Switching Capacity (resistive), Max. | 2000 VA |
| DC Switching Capacity (resistive), Max. | 192 W @ 24 V |
| Switch-on Delay | ≤ 6 ms |
| Switch-off Delay | <18 ms |
| Contact Type | 2 CO contact (AgNi) |
| Mechanical Service Life | 30 x 106 switching cycles |
| GENERAL DATA | |
| Operating Altitude | ≤ 2000 m
above sea level |
| Rail | TS 35 |
| Test Button Available | No |
| Mechanical Switch Position Indicator | No |
| Colour | black |
| UL94 Flammability Rating Component |
|
| INSULATION COORDINATION | |
| Rated Voltage | 300 V |
| Pollution Severity | 2 |
| Surge Voltage Category | III |
| Clearance And Creepage Distances For Control Side - Load Side | ≥ 6 mm |
| Dielectric Strength For Control Side - Load Side | 3.51 kVeff /1 min. |
| Type Of Isolation At Input And Output | reinforced insulation |
| Dielectric Strength Of Neighbouring Contacts | 2.5 kVeff / 1 Min. |
| Type Of Isolation At Neighbouring Contacts | Basic insulation |
| Dielectric Strength Of Open Contact | 1 kVeff / 1 min |
| Dielectric Strength To Mounting Rail | 4 kVeff / 1 Min. |
| Impulse Withstand Voltage | 6 kV (1.2/50 µs) |
| Protection Degree | IP20 |
| FURTHER DETAILS OF APPROVALS / STANDARDS | |
| Certificate No. (DNV) | TAA00001E5 |
| Certificate No. (cULus) | E141197 |
| CONNECTION DATA | |
| Wire Connection Method | Tension-clamp connection |
| Stripping Length, Rated Connection | 8 mm |
| Clamping Range, Rated Connection | 1.5 mm² |
| Clamping Range, Min. | 0.14 mm² |
| Clamping Range, Max. | 2.5 mm² |
| Wire Connection Cross Section AWG, Min. | AWG 26 |
| Wire Connection Cross Section AWG, Max. | AWG 14 |
| Wire Cross-section, Solid, Min. | 0.14 mm² |
| Wire Cross-section, Solid, Max. | 2.5 mm² |
| Wire Cross-section, Solid, Min. (AWG) | AWG 26 |
| Wire Cross-section, Solid, Max. (AWG) | AWG 14 |
| Wire Connection Cross Section, Finely Stranded, Min. | 0.14 mm² |
| Wire Connection Cross Section, Finely Stranded, Max. | 2.5 mm² |
| Wire Cross-section, Finely Stranded, Min. (AWG) | AWG 26 |
| Wire Cross-section, Finely Stranded, Max. (AWG) | AWG 14 |
| Wire Connection Cross-section, Finely Stranded With Wire-end Ferrules DIN 46228/4, Min. | 0.14 mm² |
| Wire Connection Cross-section, Finely Stranded With Wire-end Ferrules DIN 46228/4, Max. | 1.5 mm² |
| Conductor Cross-section, Flexible, AEH (DIN 46228-1), Min. | 0.14 mm² |
| Conductor Cross-section, Flexible, AEH (DIN 46228-1), Max. | 1.5 mm² |
| Blade Size | 0.6 x 3.5 mm |
Write Your Own Review