EVH5A07N2C7 - Charging station, Schneider Charge, 1P+N, attached cable 7m, 7.4kW, 32A
Schneider
SKU
SE_EVH5A07N2C7
Model
EVH5A07N2C7
SGD $1,308.00 All prices inclusive of GST
Short description of EVH5A07N2C7
- User friendly: Charge your car without disrupting your lifestyle, keeping your installation running as needed
- Fast: Speed-up your charging duration
- Sustainable: Charge your car prioritizing renewable energy thanks to Wiser scheduling function
EVH5A07N2C7 - Charging station, Schneider Charge, 1P+N, attached cable 7m, 7.4kW, 32A. This Schneider Charge product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -35°C and 50°C. The output type is a 7m attached cable with a T2 socket-outlet at the end, installed at the bottom and top centre of the station. The nominal output power is 7.4kW. It is supplied in single-phase (1P+N). The rated charging current is 32A under 230VAC at 50Hz/60Hz frequency. It can be used with a TN-S, TT or IT earthing system. The charging station is easy to install (no special tools required). It is recommended for private use at home, installed in the garage or on a wall externally. The dimensions are (W) 244mm x (H) 352mm x (D) 107mm. Its product weight is 5.3kg (without cable). Its color is white (RAL 9003) and green. It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). There is no access control to use the charging station for loading an electrical vehicle. One LED is changing color between red, green and blue in order to indicate the loading status directly on the charging station. This one allows to adjust in real time the maximum power allocated to the charging electric vehicle, according to the consumption of the rest of loads in the house and adapt the load according to Off Peak/Peak hours sent by TIC. The charging station is connected with Wiser by the Schneider ElectricTM mobile application for residential energy management. It easily starts, monitors, and controls the charging experience remotely. The OCPP 1.6 communication protocol can be used to connect to the supervision device/third party cloud. It can also be connected to Internet home router, either through Wi-Fi or RJ45 Ethernet cable.
| MAIN | |
|---|---|
| Range | Schneider Charge |
| Product Name | Schneider Charge |
| Product Or Component Type | Charging station |
| Poles Description | 1P + N |
| Mounting Mode | Wall-mounted |
| Max Power | 7.4 kW 32 A |
| Number Of Charge Point | 1 |
| Connection To The Vehicle | Attached cable T2 bottom 7 m |
| COMPLEMENTARY | |
| Rated Supply Voltage | 230...240 V AC 50...60 Hz +/- 10 % |
| Earthing System | IT 230 TT TN-S |
| Number Of Inputs | 1 |
| Input Type | Dry contact for dynamic energy management |
| Local Signalling | Red, green and blue 1 LED, function: status indication |
| Protection Type | Earth-leakage protection |
| Height | 352 mm |
| Width | 244 mm |
| Depth | 117 mm |
| Product Weight | 5.3 kg |
| Colour | White/green |
| Standards | EN 61851 IEC 61851-1 |
| Communication Network Type | Wi-Fi Wireless Ethernet |
| Communication Port Protocol | OCPP 1.6, for connection to the Schneider Electric Wiser app |
| ENVIRONMENT | |
| IP Degree Of Protection | IP55 conforming to EN/IEC 60529 |
| IK Degree Of Protection | IK10 |
| Ambient Air Temperature For Operation | -35…50 °C |
| Ambient Air Temperature For Storage | -40…85 °C |
| Relative Humidity | 5…95 % |
| Operating Altitude | 0...2000 m |
| PACKING UNITS | |
| Unit Type Of Package 1 | PCE |
| Number Of Units In Package 1 | 1 |
| Package 1 Height | 30.000 cm |
| Package 1 Width | 29.000 cm |
| Package 1 Length | 48.000 cm |
| Package 1 Weight | 7.500 kg |
| Unit Type Of Package 2 | P12 |
| Number Of Units In Package 2 | 18 |
| Package 2 Height | 103.000 cm |
| Package 2 Width | 80.000 cm |
| Package 2 Length | 120.000 cm |
| Package 2 Weight | 148.000 kg |
Write Your Own Review