ATV950D15N4E - Variable Speed Drive, Altivar Process ATV900, ATV950, 15 KW, 400/480 V, W Braking Unit/Switch, IP55.
Schneider
SKU
SE_ATV950D15N4E
Model
ATV950D15N4E
SGD $4,045.72 All prices inclusive of GST
Short description of ATV950D15N4E
ATV950D15N4E. Variable speed drive for demanding applications from 0.75kW to 800kW
Country of Origin
China
range of product : Altivar Process ATV900
- product or component type : Variable speed drive
- device application : Industrial application
- device short name : ATV950
- variant : With braking chopperWith load break switch
- product destination : Synchronous motorsAsynchronous motors
- EMC filter : Integrated with 50 m conforming to EN/IEC 61800-3 category C2Integrated with 150 m conforming to EN/IEC 61800-3 category C3
- IP degree of protection : IP55 conforming to IEC 61800-5-1IP55 conforming to IEC 60529
- type of cooling : Forced convection
- supply frequency : 50...60 Hz +/- 5 %
- network number of phases : 3 phases
- [Us] rated supply voltage : 380...480 V
- 15...10 %
- motor power kW : 15 kW (normal duty)11 kW (heavy duty)
- motor power hp : 20 hp normal duty15 hp heavy duty
- line current : 27 A at 380 V (normal duty)23.3 A at 480 V (normal duty)20.6 A at 380 V (heavy duty)18.1 A at 480 V (heavy duty)
- prospective line Isc : 50 kA
- apparent power : 19.4 kVA at 480 V (normal duty)15 kVA at 480 V (heavy duty)
- continuous output current : 31.7 A at 4 kHz for normal duty23.5 A at 4 kHz for heavy duty
- maximum transient current : 38 A during 60 s (normal duty)35.3 A during 60 s (heavy duty)
- asynchronous motor control profile : Variable torque standardOptimized torque modeConstant torque standard
- synchronous motor control profile : Permanent magnet motorSynchronous reluctance motor
- speed drive output frequency : 0.1…599 Hz
- nominal switching frequency : 4 kHz
- switching frequency : 2...16 kHz adjustable4...16 kHz with derating factor
- safety function : STO (safe torque off) SIL 3
- number of preset speeds : 16 preset speeds
- communication port protocol : Modbus serialEtherNet/IPModbus TCP
- option module : Slot A : communication module for Profibus DP V1Slot A : communication module for ProfinetSlot A : communication module for DeviceNetSlot A : communication module for EtherCATSlot A : communication module for CANopen daisy chain RJ45Slot A : communication module for CANopen SUB
- D 9Slot A : communication module for CANopen screw terminalsSlot A/slot B/slot C : digital and analog I/O extension moduleSlot A/slot B/slot C : output relay extension moduleSlot B : 5/12 V digital encoder interface moduleSlot B : analog encoder interface moduleSlot B : resolver encoder interface module communication module for Ethernet Powerlink
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- product or component type : Variable speed drive
- device application : Industrial application
- device short name : ATV950
- variant : With braking chopperWith load break switch
- product destination : Synchronous motorsAsynchronous motors
- EMC filter : Integrated with 50 m conforming to EN/IEC 61800-3 category C2Integrated with 150 m conforming to EN/IEC 61800-3 category C3
- IP degree of protection : IP55 conforming to IEC 61800-5-1IP55 conforming to IEC 60529
- type of cooling : Forced convection
- supply frequency : 50...60 Hz +/- 5 %
- network number of phases : 3 phases
- [Us] rated supply voltage : 380...480 V
- 15...10 %
- motor power kW : 15 kW (normal duty)11 kW (heavy duty)
- motor power hp : 20 hp normal duty15 hp heavy duty
- line current : 27 A at 380 V (normal duty)23.3 A at 480 V (normal duty)20.6 A at 380 V (heavy duty)18.1 A at 480 V (heavy duty)
- prospective line Isc : 50 kA
- apparent power : 19.4 kVA at 480 V (normal duty)15 kVA at 480 V (heavy duty)
- continuous output current : 31.7 A at 4 kHz for normal duty23.5 A at 4 kHz for heavy duty
- maximum transient current : 38 A during 60 s (normal duty)35.3 A during 60 s (heavy duty)
- asynchronous motor control profile : Variable torque standardOptimized torque modeConstant torque standard
- synchronous motor control profile : Permanent magnet motorSynchronous reluctance motor
- speed drive output frequency : 0.1…599 Hz
- nominal switching frequency : 4 kHz
- switching frequency : 2...16 kHz adjustable4...16 kHz with derating factor
- safety function : STO (safe torque off) SIL 3
- number of preset speeds : 16 preset speeds
- communication port protocol : Modbus serialEtherNet/IPModbus TCP
- option module : Slot A : communication module for Profibus DP V1Slot A : communication module for ProfinetSlot A : communication module for DeviceNetSlot A : communication module for EtherCATSlot A : communication module for CANopen daisy chain RJ45Slot A : communication module for CANopen SUB
- D 9Slot A : communication module for CANopen screw terminalsSlot A/slot B/slot C : digital and analog I/O extension moduleSlot A/slot B/slot C : output relay extension moduleSlot B : 5/12 V digital encoder interface moduleSlot B : analog encoder interface moduleSlot B : resolver encoder interface module communication module for Ethernet Powerlink
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Analog/digital Conversion | software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Analogue Input Number | 3 |
| Analogue Input Range | 3 |
| Discrete Input Number | 10 |
| Discrete Output Type | logic output DQ- 0-1 kHz <= 30 V DC 100 mA logic output DQ+ 0-1 kHz <= 30 V DC 100 mA programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA |
| Display Type | 2-wire RS 485 Ethernet |
| Measurement Accuracy | 1 RJ45 2 RJ45 |
| Physical Interface | 2-wire RS 485 Ethernet |
| Product Or Component Type | variable speed drive |
| Range Of Product | Altivar Process ATV900 |
| Communication Port Protocol | EtherNet/IP Modbus serial Modbus TCP |
| Degree Of Protection | UL type 1 |
| Design Of Frequency Changer | U converter |
| EMC Filter | integrated with EMC plate option |
| Line Current | 18.1 A at 480 V (heavy duty) 20.6 A at 380 V (heavy duty) 23.3 A at 480 V (normal duty) 27.0 A at 380 V (normal duty) |
| Method Of Access | slave Modbus TCP |
| Motor Power Hp | 15.0 hp for heavy duty 20.0 hp for normal duty |
| Network Number Of Phases | 3 phases |
| Number Of Input Phases | 3 |
| Number Of Output Phases | 3 |
| Product Specific Application | process for industrial |
| Range Name | Altivar Process ATV900 |
| Relative Symmetric Mains Voltage Tolerance | 10 % |
| COMPLEMENTARY | |
| Analogue Input Type | AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits |
| Analogue Output Number | 2 |
| Analogue Output Type | software-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Connector Type | 1 RJ45 2 RJ45 |
| Discrete Output Number | 2 |
| Output Voltage | AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits |
| Port Ethernet | 2 |
| [Ics] Rated Service Breaking Capacity | logic output DQ- 0-1 kHz <= 30 V DC 100 mA logic output DQ+ 0-1 kHz <= 30 V DC 100 mA programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA |
| 1 Phase Low Current Possible | false |
| 4 Quadrant Operation Possible | true |
| Acceleration And Deceleration Ramps | linear adjustable separately from 0.01...9999 s |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Apparent Power | 15 kVA at 480 V (heavy duty) 19.4 kVA at 480 V (normal duty) |
| Application In Domestic And Commercial Area Permitted | false |
| Application In Industrial Area Permitted | true |
| Assembly Style | enclosed |
| Asynchronous Motor Control Profile | constant torque standard optimized torque mode variable torque standard |
| Base Load Current At High Overload | 23.5 A |
| Base Load Current At Low Overload | 31.7 A |
| Brake Chopper Integrated | true |
| Braking To Standstill | by DC injection |
| Computer Port | true |
| Continuous Output Current | 23.5 A at 4 kHz for heavy duty 31.7 A at 4 kHz for normal duty |
| Data Format | 8 bits, configurable odd, even or no parity 8 bits, configurable odd, even or no parity for Modbus serial |
| Depth | 330 mm |
| Device Application | industrial application |
| Discrete Input Logic | 16 preset speeds negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) |
| Discrete Input Type | DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI7, DI8 programmable as pulse input: 0-30 kHz, 24 V DC (<= 30 V) STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
| Electrical Connection | control: screw terminal 0.5...1.5 mm² DC bus: screw terminal 10...16 mm² line side: screw terminal 10...16 mm² motor: screw terminal 10...16 mm² |
| EMC Limit Value (complied) | true |
| Encoder Protocol | 1 Vpp EnDat 2.2 resolver RS 422 SSI 24V SSI 5V TTL/HTL |
| Exchange Mode | half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| Height | 678 mm |
| Housing Material | plastic |
| Input Compatibility | DI1...DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| Insulation Resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| Isolation | between power and control terminals |
| Linearity Error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output |
| Local Signalling | communication module status: 2 LED (dual colour) embedded communication status: 5 LED (dual colour) local diagnostic: 3 LED (mono/dual colour) presence of voltage: 1 LED (red) |
| Marking | CE |
| Maximum Associated Fuse Rating | 50 A |
| Maximum Input Current | 27 A |
| Maximum Output Frequency | 500 kHz |
| Maximum Output Voltage | 480 V |
| Maximum Switching Current | relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R1 on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1 on resistive load, cos phi = 1 : 3 A at 30 V DC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 250 V AC relay output R2, R3 on resistive load, cos phi = 1 : 5 A at 30 V DC |
| Maximum Transient Current | 35.3 A during 60 s (heavy duty) 38 A during 60 s (normal duty) |
| Minimum Switching Current | relay output R1, R2, R3: 5 mA at 24 V DC |
| Motor Power KW | 11.0 kW for heavy duty 15.0 kW for normal duty |
| Motor Slip Compensation | adjustable automatic whatever the load can be suppressed not available in permanent magnet motor law |
| Mounting Mode | wall mount |
| Net Weight | 19.6 kg |
| Network Frequency | 50...60 Hz |
| Nominal Output Current | 31.7 A |
| Nominal Output Power | 15 W |
| Nominal Switching Frequency | 4 kHz |
| Number Of Addresses | 1-247 1-247 for Modbus serial |
| Number Of HW Interfaces Industrial Ethernet | 2 |
| Number Of HW Interfaces Serial RS485 | 1 |
| Operating Element Present | true |
| Operating Position | vertical +/- 10 degree |
| Optical Interface Present | false |
| Option Card | communication module for Ethernet Powerlink slot A/slot B/slot C: digital and analog I/O extension module slot A/slot B/slot C: output relay extension module slot A: communication module for CANopen daisy chain RJ45 slot A: communication module for CANopen screw terminals slot A: communication module for CANopen SUB-D 9 slot A: communication module for DeviceNet slot A: communication module for EtherCAT slot A: communication module for Profibus DP V1 slot A: communication module for Profinet slot B: 5/12 V digital encoder interface module slot B: analog encoder interface module slot B: resolver encoder interface module |
| Power Loss Per Device Current Dependent | 500 W |
| Power Loss Static Current Independent | 23 W |
| Product Destination | asynchronous motors synchronous motors |
| Prospective Line Isc | 50 kA |
| Protection Type | break on the control circuit: drive line supply overvoltage: drive line supply phase loss: drive line supply undervoltage: drive motor phase break: drive motor phase break: motor overcurrent between output phases and earth: drive overheating: drive overload of output voltage: drive overspeed: drive overvoltages on the DC bus: drive safe torque off: drive safe torque off: motor short-circuit protection: drive thermal protection: drive thermal protection: motor |
| Quantity Per Set | 1 |
| Refresh Time | relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Relative Symmetric Network Frequency Tolerance | 5 % |
| Relay Output Number | 3 |
| Relay Output Type | configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles |
| Sampling Duration | 1 ms +/- 1 ms (AI1, AI2, AI3) - analog input 2 ms +/- 0.5 ms (DI1...DI8) - discrete input 5 ms +/- 1 ms (AQ1, AQ2) - analog output 5 ms +/- 1 ms (DI7, DI8) - pulse input |
| Supply | external supply for digital inputs: 24 V DC (19-30 V), <1.25 mA, protection type: overload and short-circuit protection internal supply for digital inputs and STO: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection |
| Supporting Protocol For AS-Interface Safety At Work | false |
| Supporting Protocol For ASI | false |
| Supporting Protocol For BACnet | false |
| Supporting Protocol For CAN | true |
| Supporting Protocol For Data-Highway | false |
| Supporting Protocol For DeviceNet | false |
| Supporting Protocol For DeviceNet Safety | false |
| Supporting Protocol For EtherNet/IP | true |
| Supporting Protocol For Foundation Fieldbus | false |
| Supporting Protocol For INTERBUS | false |
| Supporting Protocol For INTERBUS-Safety | false |
| Supporting Protocol For KNX | false |
| Supporting Protocol For LON | false |
| Supporting Protocol For MODBUS | true |
| Supporting Protocol For Other Bus Systems | false |
| Supporting Protocol For PROFIBUS | true |
| Supporting Protocol For PROFINET CBA | true |
| Supporting Protocol For PROFINET IO | true |
| Supporting Protocol For PROFIsafe | false |
| Supporting Protocol For SafetyBUS P | false |
| Supporting Protocol For SERCOS | false |
| Supporting Protocol For SUCONET | false |
| Supporting Protocol For TCP/IP | true |
| Switching Frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| Synchronous Motor Control Profile | permanent magnet motor synchronous reluctance motor |
| Transmission Frame | RTU |
| Transmission Rate | 10, 100 Mbits 10/100 Mbit/s for Ethernet IP/Modbus TCP 19200 bit/s 4.8 kbps 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial 9600 bit/s |
| Type Of Polarization | no impedance no impedance for Modbus serial |
| Width | 264 mm |
| With Safety Function Safe Brake Management (SBC/SBT) | true |
| With Safety Function Safe Direction (SDI) | false |
| With Safety Function Safe Operating Stop (SOS) | false |
| With Safety Function Safe Position (SP) | false |
| With Safety Function Safe Programmable Logic | false |
| With Safety Function Safe Speed Monitor (SSM) | false |
| With Safety Function Safe Stop 1 (SS1) | true |
| With Safety Function Safe Torque Off (STO) | true |
| With Safety Function Safely Limited Position (SLP) | false |
| With Safety Function Safely Limited Speed (SLS) | true |
| With Sft Fct Safe Stop 2 (SS2) | false |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -15-40 °C (without derating) -15-50 °C 40-50 °C (with derating factor) |
| Ambient Air Temperature For Storage | -40-70 °C |
| Ambient Air Transport Temperature | -40-70 °C |
| Electromagnetic Compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 |
| Environmental Characteristic | chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 |
| Environmental Class (during Operation) | class 3C3 according to IEC 60721-3-3 class 3S3 according to IEC 60721-3-3 |
| Environmental Class (during Storage) | class 1C3 according to EN 60721-3-1 class 1S2 according to EN 60721-3-1 |
| Environmental Class (during Transport) | class 2C3 according to EN 60721-3-2 class 2S1 according to EN 60721-3-2 |
| IP Degree Of Protection | IP55 |
| Maximum Acceleration Under Shock Impact (during Operation) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Shock Load (during Storage) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Shock Load (during Transport) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Vibrational Stress (during Operation) | 10 m/s² at 13...200 Hz |
| Maximum Acceleration Under Vibratory Load (during Storage) | 10 m/s² at 13...200 Hz |
| Maximum Acceleration Under Vibratory Load (during Transport) | 10 m/s² at 13...200 Hz |
| Maximum Deflection Under Vibratory Load (during Operation) | 1.5 mm at 2...13 Hz |
| Maximum Deflection Under Vibratory Load (during Storage) | 1.5 mm at 2...13 Hz |
| Maximum Deflection Under Vibratory Load (during Transport) | 1.5 mm at 2...13 Hz |
| Maximum THDI | <48 % from 80...100 % of load conforming to IEC 61000-3-12 |
| Noise Level | 53.7 dB 53.7 dB conforming to 86/188/EEC |
| Operating Altitude | <= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m |
| Overvoltage Category | III |
| Permitted Relative Humidity (during Operation) | class 3K5 according to EN 60721-3 |
| Permitted Relative Humidity (during Storage) | class 1K5 according to EN 60721-3 |
| Permitted Relative Humidity (during Transport) | class 2K5 according to EN 60721-3 |
| Pollution Degree | 2 |
| Product Certifications | TÜV |
| Regulation Loop | adjustable PID regulator |
| Relative Humidity | 5-95 % without condensation conforming to IEC 60068-2-3 |
| Shock Resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Standards | EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 13849-1 IEC 60721-3 IEC 61000-3-12 IEC 61508 UL 508C |
| Vibration Resistance | 1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6 1.5 mm peak to peak (f= 2-13 Hz) conforming to IEC 60068-2-6 |
| OTHER | |
| Poles Description | variable speed drive |
| [Us] Rated Supply Voltage | 380...480 V 380...480 V - 15...10 % |
Write Your Own Review