ATV650U75N4E - Variable Speed Drive, Altivar Process ATV600, ATV650, 7.5 KW, 400...480 V, IP55.
Schneider
SKU
SE_ATV650U75N4E
Model
ATV650U75N4E
Obsolete
Short description of ATV650U75N4E
ATV650U75N4E. Variable speed drive for fluid management from 0.75kW to 800kW
Obsolete
range of product : Altivar Process ATV600
- product or component type : Variable speed drive
- product specific application : Process and utilities
- device short name : ATV650
- variant : With disconnect switch
- product destination : Asynchronous motorsSynchronous motors
- EMC filter : Integrated with 150 m conforming to EN/IEC 61800-3 category C3Integrated with 50 m conforming to EN/IEC 61800-3 category C2
- IP degree of protection : IP55 conforming to IEC 60529IP55 conforming to IEC 61800-5-1
- type of cooling : Forced convection
- supply frequency : 50...60 Hz
- 5...5 %
- [Us] rated supply voltage : 380...480 V
- 15...10 %
- motor power kW : 5.5 kW (heavy duty)7.5 kW (normal duty)
- motor power hp : 7.5 hp heavy duty10 hp normal duty
- line current : 11.9 A at 480 V (normal duty)10.5 A at 380 V (heavy duty)9.2 A at 480 V (heavy duty)13.8 A at 380 V (normal duty)
- prospective line Isc : 50 kA
- apparent power : 7.6 kVA at 480 V (heavy duty)9.9 kVA at 480 V (normal duty)
- continuous output current : 12.7 A at 4 kHz for heavy duty16.5 A at 4 kHz for normal duty
- maximum transient current : 19.1 A during 60 s (heavy duty)18.2 A during 60 s (normal duty)
- asynchronous motor control profile : Constant torque standardVariable torque standardVariable torque standard
- synchronous motor control profile : Synchronous reluctance motorPermanent magnet motor
- output frequency : 0.0001…0.5 kHz
- speed drive output frequency : 0.1…599 Hz
- nominal switching frequency : 4 kHz
- switching frequency : 4...12 kHz with derating factor2...12 kHz adjustable
- safety function : STO (safe torque off) SIL 3
- discrete input logic : 16 preset speeds
- communication port protocol : EthernetModbus TCPEthernet
- option card : Slot A : communication module, ProfinetSlot A : communication module, DeviceNetSlot A : communication module, Modbus TCP/EtherNet/IPSlot A : communication module, CANopen daisy chain RJ45Slot A : communication module, CANopen SUB
- D 9Slot A : communication module, CANopen screw terminalsSlot A/slot B : digital and analog I/O extension moduleSlot A/slot B : output relay extension moduleSlot A : communication module, Ethernet IP/Modbus TCP/MD
- LinkCommunication module, BACnet MS/TPCommunication module, Ethernet PowerlinkSlot A : communication module, Profibus DP V1
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- product or component type : Variable speed drive
- product specific application : Process and utilities
- device short name : ATV650
- variant : With disconnect switch
- product destination : Asynchronous motorsSynchronous motors
- EMC filter : Integrated with 150 m conforming to EN/IEC 61800-3 category C3Integrated with 50 m conforming to EN/IEC 61800-3 category C2
- IP degree of protection : IP55 conforming to IEC 60529IP55 conforming to IEC 61800-5-1
- type of cooling : Forced convection
- supply frequency : 50...60 Hz
- 5...5 %
- [Us] rated supply voltage : 380...480 V
- 15...10 %
- motor power kW : 5.5 kW (heavy duty)7.5 kW (normal duty)
- motor power hp : 7.5 hp heavy duty10 hp normal duty
- line current : 11.9 A at 480 V (normal duty)10.5 A at 380 V (heavy duty)9.2 A at 480 V (heavy duty)13.8 A at 380 V (normal duty)
- prospective line Isc : 50 kA
- apparent power : 7.6 kVA at 480 V (heavy duty)9.9 kVA at 480 V (normal duty)
- continuous output current : 12.7 A at 4 kHz for heavy duty16.5 A at 4 kHz for normal duty
- maximum transient current : 19.1 A during 60 s (heavy duty)18.2 A during 60 s (normal duty)
- asynchronous motor control profile : Constant torque standardVariable torque standardVariable torque standard
- synchronous motor control profile : Synchronous reluctance motorPermanent magnet motor
- output frequency : 0.0001…0.5 kHz
- speed drive output frequency : 0.1…599 Hz
- nominal switching frequency : 4 kHz
- switching frequency : 4...12 kHz with derating factor2...12 kHz adjustable
- safety function : STO (safe torque off) SIL 3
- discrete input logic : 16 preset speeds
- communication port protocol : EthernetModbus TCPEthernet
- option card : Slot A : communication module, ProfinetSlot A : communication module, DeviceNetSlot A : communication module, Modbus TCP/EtherNet/IPSlot A : communication module, CANopen daisy chain RJ45Slot A : communication module, CANopen SUB
- D 9Slot A : communication module, CANopen screw terminalsSlot A/slot B : digital and analog I/O extension moduleSlot A/slot B : output relay extension moduleSlot A : communication module, Ethernet IP/Modbus TCP/MD
- LinkCommunication module, BACnet MS/TPCommunication module, Ethernet PowerlinkSlot A : communication module, Profibus DP V1
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Analog/digital Conversion | software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits software-configurable current DQ-, DQ+: 100 mA software-configurable current DQ-, DQ+: 30 V DC software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Analogue Input Number | 3 |
| Analogue Input Range | 3 |
| Discrete Input Number | 8 |
| Discrete Output Type | relay outputs R1A, R1B, R1C 250 V AC 3000 mA relay outputs R1A, R1B, R1C 30 V DC 3000 mA relay outputs R2A, R2C 250 V AC 5000 mA relay outputs R2A, R2C 30 V DC 5000 mA relay outputs R3A, R3C 250 V AC 5000 mA relay outputs R3A, R3C 30 V DC 5000 mA |
| Display Type | 2-wire RS 485 Ethernet |
| Measurement Accuracy | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial |
| Physical Interface | 2-wire RS 485 Ethernet |
| Product Or Component Type | variable speed drive |
| Range Of Product | Altivar Process ATV600 |
| Communication Port Protocol | Ethernet Modbus TCP |
| Design Of Frequency Changer | U converter |
| Device Short Name | ATV650 |
| EMC Filter | integrated with 150 m conforming to EN/IEC 61800-3 category C3 integrated with 50 m conforming to EN/IEC 61800-3 category C2 |
| Line Current | 10.5 A at 380 V (heavy duty) 11.9 A at 480 V (normal duty) 13.8 A at 380 V (normal duty) 9.2 A at 480 V (heavy duty) |
| Method Of Access | slave Modbus TCP |
| Motor Power Hp | 10 hp normal duty 7.5 hp heavy duty |
| Network Number Of Phases | 3 phases |
| Number Of Input Phases | 3 |
| Number Of Output Phases | 3 |
| Product Specific Application | process and utilities |
| Range Name | Altivar Process ATV600 |
| Relative Symmetric Mains Voltage Tolerance | 10 % |
| COMPLEMENTARY | |
| Analogue Input Type | AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
| Analogue Output Number | 2 |
| Analogue Output Type | software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits software-configurable current DQ-, DQ+: 100 mA software-configurable current DQ-, DQ+: 30 V DC software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Connector Type | RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial |
| Discrete Output Number | 2 |
| Output Voltage | <= power supply voltage |
| [Ics] Rated Service Breaking Capacity | relay outputs R1A, R1B, R1C 250 V AC 3000 mA relay outputs R1A, R1B, R1C 30 V DC 3000 mA relay outputs R2A, R2C 250 V AC 5000 mA relay outputs R2A, R2C 30 V DC 5000 mA relay outputs R3A, R3C 250 V AC 5000 mA relay outputs R3A, R3C 30 V DC 5000 mA |
| 1 Phase Low Current Possible | false |
| 4 Quadrant Operation Possible | false |
| Acceleration And Deceleration Ramps | linear adjustable separately from 0.01...9999 s |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output |
| Apparent Power | 7.6 kVA at 480 V (heavy duty) 9.9 kVA at 480 V (normal duty) |
| Application In Domestic And Commercial Area Permitted | false |
| Application In Industrial Area Permitted | true |
| Asynchronous Motor Control Profile | constant torque standard variable torque standard |
| Base Load Current At High Overload | 12.7 A |
| Base Load Current At Low Overload | 16.5 A |
| Brake Chopper Integrated | false |
| Braking To Standstill | by DC injection |
| Capacity Of DC Link | 1000 µF |
| Computer Port | true |
| Continuous Output Current | 12.7 A at 4 kHz for heavy duty 16.5 A at 4 kHz for normal duty |
| Data Format | 8 bits, configurable odd, even or no parity |
| Depth | 330 mm |
| Discrete Input Logic | negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1) positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) 16 preset speeds |
| Discrete Input Type | DI7, DI8 programmable as pulse input: 0-30 kHz, 24 V DC (<= 30 V) |
| Electrical Connection | control: removable screw terminals 0.5...1.5 mm² line side: screw terminal 4...6 mm²/AWG 12...AWG10 motor: screw terminal 6...10 mm²/AWG 10...AWG 8 |
| EMC Limit Value (complied) | true |
| Enclosure Mounting | wall mounted |
| Exchange Mode | half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Frequency Resolution | analog input: 0.012/50 Hz display unit: 0.1 Hz |
| Height | 678 mm |
| Housing Material | plastic |
| Input Compatibility | DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| Insulation Resistance | > 1 MOhm 500 V DC for 1 minute to earth |
| Isolation | between power and control terminals |
| Linearity Error | AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AO1, AO2: +/- 0.2 % for analog output |
| Local Signalling | 1 LED (red) for presence of voltage 3 LEDs (dual colour) for embedded communication status 3 LEDs for local diagnostic 4 LEDs (dual colour) for communication module status |
| Marking | CE |
| Maximum Associated Fuse Rating | 25 A |
| Maximum Input Current | 13.8 A |
| Maximum Output Frequency | 500 kHz |
| Maximum Output Voltage | 480 V |
| Maximum Switching Current | relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R1, R2, R3 on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1, R2, R3 on resistive load, cos phi = 1 : 3 A at 30 V DC |
| Maximum Transient Current | 18.2 A during 60 s (normal duty) 19.1 A during 60 s (heavy duty) |
| Minimum Switching Current | relay output R1, R2, R3: 5 mA at 24 V DC |
| Motor Power KW | 5.5 kW (heavy duty) 7.5 kW (normal duty) |
| Motor Slip Compensation | adjustable can be suppressed not available in permanent magnet motor law |
| Mounting Mode | wall mount |
| Net Weight | 13.7 kg |
| Network Frequency | 50...60 Hz |
| Nominal Output Current | 16.5 A |
| Nominal Output Power | 7.5 kW |
| Nominal Switching Frequency | 4 kHz |
| Number Of Addresses | 1-247 for Modbus |
