Loading...

Scotch-Brite™ Clean and Strip XT Pro Disc, 4 in x 5/8 in

3M
SKU
3M_XN002039305
Model
7100191124
SGD $6.31 All prices inclusive of GST

Short description of 7100191124

Legacy 3M Model: XN002039305

Scotch-Brite™ Clean and Strip XT Pro Disc features silicon carbide abrasive mineral incorporated into an open nylon web. It effectively removes rust, paint, mill scale, coatings and adhesives from surfaces without significantly altering the base material. The high-strength fibers are highly conformable, resist chunking and loading, and perform well on the edges of a workpiece.

Quickly removes rust, paint, mill scale and coatings from metal

High-strength fiber resists chunking and performs well on edges

High conformability provides a larger contact patch for faster removal rates

Silicon carbide mineral cuts aggressively and leaves a fine finish

Resists loading for consistent cutting action

High speed rating, low vibration and low spark
Country of Origin
Thailand
-
+

UOM: Piece

In stock
In Stock 12151
Backorder Leadtime: 10 to 12 Weeks

Certificate of Conformance (COC) can be provided upon purchase subjected to manufacturer approval.

*All information are subjected to changes without prior notice.
Take Advantage of High Conformability
With its reengineered fiber, the Scotch-Brite™ Clean and Strip XT Pro Disc allows operators to take advantage of all the benefits that come with increased conformability without compromising strength. With increased conformability, this disc achieves a larger contact area with the workpiece for faster removal rates. It also conforms to weld bead ripples to polish welds without removing them, and works in hard-to-reach areas without damaging the substrate.

In addition to its high conformability, the Scotch-Brite™ Clean and Strip XT Pro Disc offers low vibration, decreased chunking, low spark, a high speed rating and long life. That all adds up to a disc you can spin onto your angle grinder with confidence.

Spongy Web, Sharp Mineral
To engineer the Scotch-Brite™ Clean and Strip XT Pro Disc, silicon carbide mineral is combined with non-woven nylon fibers using resin. Silicon carbide is a very sharp synthetic mineral commonly used in low-pressure applications like paint prep. The resin bond strengthens the disc and gradually breaks down to reveal new fibers and sharp mineral – delivering a consistent cut over the life of the abrasive.

The combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, minimizing loading of the abrasive.

Applications

Rust removal
Paint removal
Mill scale removal
Coating removal
Adhesive removal
Surface preparation
Product ColorPurple
Abrasive MaterialSilicon Carbide
ApplicationSurface Preparation
Backing MaterialNon Pertinent
Backing Thickness (Imperial) UOMNP
Backing WeightNon Pertinent
Center Hole Diameter (Imperial)0.625
Center Hole Diameter (Imperial) UOMin
Center Hole Diameter (Metric)15.875
Center Hole Diameter (Metric) UOMmm
Center Hole Thread SizeNon Pertinent
Disc TypeNon Pertinent
GritNon Pertinent
Hole ConfigurationNon Pertinent
IndustriesTransportation
Mesh Size UOMNP
Micron GradeNon Pertinent
Number Of Plies-12345
Overall Diameter (Imperial)4
Overall Diameter (Imperial) UOMin
Overall Diameter (Metric)101.6
Overall Diameter (Metric) UOMmm
Product CategoryNon-woven Abrasives
Product FormDisc
Sub ApplicationsRust Removal
Write Your Own Review
You're reviewing:Scotch-Brite™ Clean and Strip XT Pro Disc, 4 in x 5/8 in
Your Rating