ABE7S16S2B0 - Sub-base - Soldered Solid State Output Relay ABE7 - 16 Outputs - 0.5 A.
Schneider
SKU
SE_ABE7S16S2B0
Model
ABE7S16S2B0
SGD $900.71 All prices inclusive of GST
Short description of ABE7S16S2B0
ABE7S16S2B0. Telefast pre-wired system - IP20 sub-bases
Country of Origin
Latvia
range of product : Modicon ABE7
- product or component type : Solid state output relay sub
- base
- [Us] rated supply voltage : 24 V DC for PLC end24 V DC for preactuator end
- number of channels : 16
- number of terminal per channel : 2
- relay type : Soldered solid state relay
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
- product or component type : Solid state output relay sub
- base
- [Us] rated supply voltage : 24 V DC for PLC end24 V DC for preactuator end
- number of channels : 16
- number of terminal per channel : 2
- relay type : Soldered solid state relay
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
| MAIN SPECIFICATIONS | |
|---|---|
| Analogue Input Number | 24 V DC for PLC end 24 V DC for preactuator end |
| Product Or Component Type | solid state output relay sub-base |
| Range Of Product | Modicon ABE7 |
| Current Per Channel | 0.5 A for preactuator end |
| Number Of Channels | 16 |
| Number Of Terminal Per Channel | 2 |
| Range Name | Modicon ABE7 |
| Relay Type | soldered solid state relay |
| Terminal Block Type | removable |
| COMPLEMENTARY | |
| Current State 0 Guaranteed | 0.4 mA (PLC end) |
| Current State 1 Guaranteed | 3.1 mA (PLC end) |
| Drop-out Voltage | 0.6 V (preactuator end) |
| Fault Indication | yes |
| Fault Type | overload short-circuit |
| Fixing Mode | by clips (35 mm symmetrical DIN rail) by screws (solid plate with fixing kit) |
| Isolation PLC/operative Part | no |
| Maximum Circuit Breaker Threshold | 0.75 A |
| Maximum Current Per Output Common | 8 A |
| Maximum Residual Current | 0.3 mA preactuator end |
| Maximum Switching Current | 500 mA DC-12 500 mA DC-13 |
| Maximum Tungsten Load | <10 W DC-6 |
| Minimum Switching Current | 1 mA |
| Net Weight | 0.405 kg |
| Response Time | <= 0.02 ms from state 1 to 0 <= 0.1 ms from state 0 to 1 |
| Switchable Inductive Energy L/R | <= 400(U.I) ms |
| Switching Frequency | < 0.6/LI² Hz |
| Tightening Torque | 0.6 N.m with flat Ø 3.5 mm screwdriver |
| Voltage State 0 Guaranteed | 3.4 V for PLC end |
| Voltage State 1 Guaranteed | 16.9 V for PLC end |
| Width | 206 mm |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -5-60 °C conforming to IEC 61131-2 |
| Ambient Air Temperature For Storage | -40-80 °C conforming to IEC 61131-2 |
| Installation Category | II conforming to IEC 60664-1 |
| IP Degree Of Protection | IP2x conforming to IEC 60529 |
| Pollution Degree | 2 conforming to IEC 60664-1 |
| Product Certifications | BV CSA DNV EAC GL LROS (Lloyds register of shipping) UL |
| Protective Treatment | TC |
| Resistance To Fast Transients | 2 kV level 3 conforming to IEC 61000-4-4 |
| Resistance To Incandescent Wire | 750 °C, extinction time <30 s conforming to IEC 60695-2-11 |
| Resistance To Radiated Fields | 10 V/m (26000000-1000000000 Hz) conforming to IEC 61000-4-3 level 3 |
| Shock Resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| OTHER | |
| Poles Description | solid state output relay sub-base |
| [Us] Rated Supply Voltage | 24 V DC for PLC end 24 V DC for preactuator end |
Write Your Own Review