Sub-base - Soldered Electromechanical Relays ABE7 - 8 Channels - Relay 10 Mm.
Schneider
SKU
SE_ABE7R08S210
Model
ABE7R08S210
SGD $974.72
Short description of ABE7R08S210
Telefast pre-wired system - IP20 sub-bases
Country of Origin
Latvia
range of product : Modicon ABE7
- product or component type : Electromechanical output relay sub
- base
- [Us] rated supply voltage : 24 V DC for PLC end
- number of channels : 8
- number of terminal per channel : 2
- product or component type : Electromechanical output relay sub
- base
- [Us] rated supply voltage : 24 V DC for PLC end
- number of channels : 8
- number of terminal per channel : 2
| MAIN SPECIFICATIONS | |
|---|---|
| Analogue Input Number | 24 V DC for PLC end |
| Contacts Type And Composition | 1 NO for preactuator end |
| Discrete Input Number | 1 NO for preactuator end |
| Product Or Component Type | electromechanical output relay sub-base |
| Range Of Product | Modicon ABE7 |
| Current Per Channel | 5 A for preactuator end |
| Number Of Channels | 8 |
| Number Of Terminal Per Channel | 2 |
| Range Name | Modicon ABE7 |
| Terminal Block Type | removable |
| COMPLEMENTARY | |
| Contact Bounce Time | <= 5 ms 1 NO |
| Drop-out Current | 1 mA at 20 °C |
| Drop-out Voltage | 2.4 V at 20 °C (PLC end) |
| Electrical Durability | 500000 cycles, maximum switching current: 1500 mA at 230 V AC-12 (preactuator end) 500000 cycles, maximum switching current: 1500 mA at 24 V DC-12 (preactuator end) 500000 cycles, maximum switching current: 600 mA at 24 V DC-13 10 ms (preactuator end) 500000 cycles, maximum switching current: 900 mA at 230 V AC-15 (preactuator end) |
| Electrical Reliability | 1.0E-8 |
| Fixing Mode | by clips (35 mm symmetrical DIN rail) by screws (solid plate with fixing kit) |
| Maximum Current Per Output Common | 10 A |
| Maximum Power Dissipation Per Channel In W | 0.36 W (PLC end) |
| Maximum Switching Voltage | 250 V AC 50/60 Hz conforming to IEC 60947-5-1 30 V DC conforming to IEC 60947-5-1 |
| Mechanical Durability | 20000000 cycles |
| Minimum Switching Current | 10 mA at >= 5 V |
| Net Weight | 0.448 kg |
| Operating Rate In Hz | 0.5 Hz at Ie 10 Hz no load |
| Operating Time | <= 10 ms coil energisation and NO closing <= 5 ms coil de-energisation and NO opening |
| Polarity Distribution | volt-free |
| Switching Frequency | <= 0.5 Hz <= 10 Hz |
| Threshold Tripping Voltage | 19.7 V at 40 °C |
| Tightening Torque | 0.6 N.m with flat Ø 3.5 mm screwdriver |
| Width | 125 mm |
| [Uimp] Rated Impulse Withstand Voltage | 2.5 kV conforming to IEC 60947-1 |
| [Ui] Rated Insulation Voltage | 2000 V |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -5-60 °C conforming to IEC 61131-2 |
| Ambient Air Temperature For Storage | -40-80 °C conforming to IEC 61131-2 |
| Dielectric Strength | 2000 V conforming to IEC 60947-1 |
| Installation Category | II conforming to IEC 60664-1 |
| IP Degree Of Protection | IP2x conforming to IEC 60529 |
| Max Immunity To Microbreaks | 5 ms |
| Pollution Degree | 2 conforming to IEC 60664-1 |
| Product Certifications | BV CSA DNV EAC GL LROS (Lloyds register of shipping) UL |
| Protective Treatment | TC |
| Resistance To Fast Transients | 2 kV level 3 conforming to IEC 61000-4-4 |
| Resistance To Incandescent Wire | 750 °C, extinction time <30 s conforming to IEC 60695-2-11 |
| Resistance To Radiated Fields | 10 V/m (26000000-1000000000 Hz) conforming to IEC 61000-4-3 level 3 |
| Shock Resistance | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| OTHER | |
| Poles Description | electromechanical output relay sub-base |
| [Us] Rated Supply Voltage | 24 V DC for PLC end |
Write Your Own Review