Basic Analog Input Kit STB - 4..20 MA - 2 I - 10 Bits.
Schneider
SKU
SE_STBACI1225K
Model
STBACI1225K
SGD $453.96
Short description of STBACI1225K
IP20 modular distributed I/O
Country of Origin
Indonesia
range of product : Modicon STB distributed I/O solution
-  product or component type : Basic analog input kit
-  kit composition : STBXTS1100, 6-terminal screw type connectorSTBXBA1000 baseSTBXTS2100, 6-terminal spring clamp connectorSTBACI1225 module
-  analogue input type : Current 4...20 mA
-  analogue input number : 2
-  analogue input resolution : 10 bits
-  type of filter : Single low pass input filter 25 Hz
-  product or component type : Basic analog input kit
-  kit composition : STBXTS1100, 6-terminal screw type connectorSTBXBA1000 baseSTBXTS2100, 6-terminal spring clamp connectorSTBACI1225 module
-  analogue input type : Current 4...20 mA
-  analogue input number : 2
-  analogue input resolution : 10 bits
-  type of filter : Single low pass input filter 25 Hz
MAIN SPECIFICATIONS | |
---|---|
Analogue Input Number | 2 |
Analogue Input Range | 2 |
Product Or Component Type | basic analog input kit |
Range Of Product | Modicon STB distributed I/O solution |
Analogue Input Resolution | 10 bits |
Range Name | Modicon STB |
Type Of Filter | single low pass input filter 25 Hz |
COMPLEMENTARY | |
Analogue Input Type | current 4...20 mA |
Output Voltage | current 4...20 mA |
Absolute Accuracy Error | +/- 0.5 % of full scale 25 °C |
Absolute Maximum Input | 25 mA/50 V DC |
Addressing Requirement | 2 input words |
Cold Swapping | yes |
Current Consumption | 30 mA at 5 V DC for logic bus |
Data Format | EN 61131-2 IEC 61131-2 |
Depth | 70 mm |
Differential Linearity | monotonic |
Height | 13.9 mm |
Hot Swapping Fallback | no for basic NIMs |
Input Impedance | <= 300 Ohm |
Insulation Between Channels And Logic Bus | 1500 V for 1 minute |
Insulation Between Channels And Sensor Bus | 30 V |
Integral Linearity | +/- 0.2 %FS |
Kit Composition | STBACI1225 module STBXBA1000 base STBXTS1100, 6-terminal screw type connector STBXTS2100, 6-terminal spring clamp connector |
Marking | CE |
Maximum Supply Current For Sensors | 100 mA per input channels |
Product Compatibility | mounting base STBXBA1000 power distribution module STBPDT3100/3105 |
Response Time | 5 ms |
Status LED | 1 LED (green)module status (RDY) |
Supply | power distribution module |
Temperature Drift | +/-0.01 %/°C |
Update Time | 10 ms |
Width | 128.3 mm |
ENVIRONMENT | |
Ambient Air Temperature For Operation | 0-60 °C 32...140 °F without derating |
Ambient Air Temperature For Storage | -40...185 °F without derating -40-85 °C without derating |
IP Degree Of Protection | IP20 conforming to EN 61131-2 class 1 |
Operating Altitude | <= 2000 m |
Overvoltage Category | II |
Pollution Degree | 2 conforming to IEC 60664-1 |
Product Certifications | ATEX Cat 3G CSA C-Tick FM Class 1 Division 2 UL |
Relative Humidity | 95-95 % at 60-60 °C without condensation |
Shock Resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
Vibration Resistance | +/-0.35 mm at 10-58 Hz 3 gn at 58-150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58-150 Hz on 35 x 15 mm symmetrical DIN rail |
OTHER | |
Poles Description | basic analog input kit |
[Us] Rated Supply Voltage | 24 V DC |
Write Your Own Review