single phase relay, Harmony Solid State Relays, 25A, DIN rail mount, zero voltage switching, input 90 to 280V AC, output 24 to 300V AC
Schneider
SKU
SE_SSP1A125M7
Model
SSP1A125M7
SGD $90.50
Short description of SSP1A125M7
SSP panel mount relay is part of the Harmony Solid sate relays range. This single-phase panel mount static relay accepts wiring with either bare cable, crimped cable ends, fork lugs or ring lugs Its rated current is 25A, is controlled withA 90V to 280V AC circuit, has a rated load voltage of 24V to 300V AC output. It also has a test button for easy debugging, testing and commissioning. 0 It has a visual indicator showing the status of its input and a alarm output enabling a quick response to unexpected events 0
Country of Origin
Mexico
Factory-installed thermal pad for long lasting thermal performance and lower risk of down-time
Wide choice of heat sinks with thermal resistance ratings of 36.5°F/W to 32.4°F/W
Easy product selection with simplified product nomenclature and direct heat sink selection
| MAIN | |
|---|---|
| Range Of Product | Harmony Solid State Relays |
| Product Or Component Type | Solid state relay up to 30 A |
| Device Short Name | SSP1 |
| Mounting Support | Panel |
| Number Of Phases | 1 phase |
| Line Rated Current | 25 A |
| Solid State Output Type | SCR output Zero voltage switching |
| Output Switching Mode | Zero voltage switching |
| COMPLEMENTARY | |
| [Uc] Control Circuit Voltage | 90...280 V AC |
| Minimum Switching Voltage | 90 V AC turn-on |
| Maximum Switching Voltage | 10 V AC turn-off |
| Response Time | 30 ms (turn-off) 25 ms (turn-on) |
| Input Current | 5…10 mA |
| Output Voltage | 24...300 V AC |
| Load Current | 0.15…25 A |
| Transient Overvoltage | 600 V |
| Surge Current | 250 A 16.6 ms |
| Maximum I²t For Fusing | 259 A².s for 8.33 ms at 60 Hz 285 A².s for 10 ms at 50 Hz |
| Co-ordination Type | Type 1 - 25 A miniature circuit breaker (MCB) B Type 2 - 20 A miniature circuit breaker (MCB) B |
| Maximum Leakage Current | 1 mA off-state |
| Maximum Voltage Drop | <1.15 V on-state |
| DV/dt | 500 V/µs off-state at maximum voltage |
| Power Factor | 0.5 (with maximum load) |
| Motor Controller Rating | 0.5 hp 120 V AC 1 hp 240 V AC |
| Insulation Resistance | 1000 MOhm at 500 V DC |
| Maximum Capacitance | 8 pF for input/output |
| Dielectric Strength | 4 kV AC for input/output 4 kV AC for input or output to case |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV output to case 6 kV input to output |
| Tightening Torque | 1.5...1.7 N.m for input 2...2.2 N.m for output |
| Connections - Terminals | Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) with cable end input Screw terminals 0.5...5.26 mm², AWG 20...AWG 10) with cable end output Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) without cable end input Screw terminals 0.5...8.26 mm², AWG 20...AWG 8) without cable end output Forked type tag connectors 9.2 x 4 mm input Ring lugs 9.2 x 4 mm input Forked type tag connectors 11.7 x 4.5 mm output Ring lugs 11.7 x 4.5 mm output |
| Thermal Resistance | 0.8 °C/W junction to case |
| LED Indicator | LED, green input |
| IP Degree Of Protection | IP20 |
| Safety Reliability Data | B10d = 1731395 MTTFd = 1875.9 years |
| Net Weight | 3.15 oz (89.2 g) |
| Device Presentation | Complete product |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -40…176 °F (-40…80 °C) |
| Ambient Air Temperature For Storage | -40…257 °F (-40…125 °C) |
| Pollution Degree | 2 |
| Overvoltage Category | III |
| Product Certifications | CE CSA UL EAC |
| Marking | CE EAC CSA UL |
| Standards | IEC 62314 UL 508 IEC 60950-1 CSA C22.2 No 14-13 |
| ORDERING AND SHIPPING DETAILS | |
| Category | 22375-INTERFACE MODULE(ABA,R,S) |
| Discount Schedule | CP2 |
| GTIN | 3606485441931 |
| Returnability | Yes |
| Country Of Origin | MX |
Write Your Own Review