LC1D25F7 TeSys D Contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A
Schneider
SKU
SE_LC1D25F7
Model
LC1D25F7
Special Price SGD $35.46 Regular Price SGD $67.98 All prices inclusive of GST
Short description of LC1D25F7
TeSys D contactor, 3 poles (3NO), for motor control applications up to 25A/690V AC-3/3e (11kW@400V). It provides a 110V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
Country of Origin
India
range : TeSys
-  product name : TeSys D
-  product or component type : Contactor
-  device short name : LC1D
-  contactor application : Resistive loadMotor control
-  utilisation category : AC
- 3AC
- 4AC
- 1
-  poles description : 3P
-  power pole contact composition : 3 NO
-  [Ue] rated operational voltage : Power circuit-  [Ie] rated operational current : 25 A (at - motor power kW : 5.5 kW at 220...230 V AC 50/60 Hz (AC
- 3)11 kW at 380...400 V AC 50/60 Hz (AC
- 3)11 kW at 415...440 V AC 50/60 Hz (AC
- 3)15 kW at 500 V AC 50/60 Hz (AC
- 3)15 kW at 660...690 V AC 50/60 Hz (AC
- 3)5.5 kW at 400 V AC 50/60 Hz (AC
- 4)
-  motor power HP (UL / CSA) : 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors2 hp at 115 V AC 50/60 Hz for 1 phase motors7.5 hp at 230/240 V AC 50/60 Hz for 3 phases motors15 hp at 460/480 V AC 50/60 Hz for 3 phases motors20 hp at 575/600 V AC 50/60 Hz for 3 phases motors7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors
-  control circuit type : AC at 50/60 Hz
-  [Uc] control circuit voltage : 110 V AC 50/60 Hz
-  auxiliary contact composition : 1 NO + 1 NC
-  [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
-  overvoltage category : III
-  [Ith] conventional free air thermal current : 10 A (at 60 °C) for signalling circuit40 A (at 60 °C) for power circuit
-  Irms rated making capacity : 140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1450 A at 440 V for power circuit conforming to IEC 60947
-  rated breaking capacity : 450 A at 440 V for power circuit conforming to IEC 60947
-  [Icw] rated short
- time withstand current : 240 A 40 °C
-  10 s for power circuit380 A 40 °C
-  1 s for power circuit50 A 40 °C
-  10 min for power circuit120 A 40 °C
-  1 min for power circuit100 A
-  1 s for signalling circuit120 A
-  500 ms for signalling circuit140 A
-  100 ms for signalling circuit
-  associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-163 A gG at - average impedance : 2 mOhm
-  Ith 40 A 50 Hz for power circuit
-  [Ui] rated insulation voltage : Power circuit :  690 V conforming to IEC 60947-4-1Power circuit :  600 V CSA certifiedPower circuit :  600 V UL certifiedSignalling circuit :  690 V conforming to IEC 60947-1Signalling circuit :  600 V CSA certifiedSignalling circuit :  600 V UL certified
-  electrical durability : 1.65 Mcycles 25 A AC
- 3 at Ue
-  power dissipation per pole : 3.2 W AC
- 11.25 W AC
- 3
-  Front cover : With
-  mounting support : PlateRail
-  standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
-  product certifications : ULBVRINACCCGLGOSTDNVLROS (Lloyds register of shipping)CSA
-  connections
-  terminals : Control circuit :  screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit :  screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit :  screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit :  screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit :  screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit :  screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit :  screw clamp terminals 1 cable(s) 2.5…10 mm²flexible without cable endPower circuit :  screw clamp terminals 2 cable(s) 2.5…10 mm²flexible without cable endPower circuit :  screw clamp terminals 1 cable(s) 1…10 mm²flexible with cable endPower circuit :  screw clamp terminals 2 cable(s) 1.5…6 mm²flexible with cable endPower circuit :  screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable endPower circuit :  screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
-  tightening torque : Control circuit :  1.7 N.m
-  on screw clamp terminals
-  with screwdriver flat Ø 6 mmControl circuit :  1.7 N.m
-  on screw clamp terminals
-  with screwdriver Philips No 2Power circuit :  2.5 N.m
-  on screw clamp terminals
-  with screwdriver flat Ø 6 mmPower circuit :  2.5 N.m
-  on screw clamp terminals
-  with screwdriver Philips No 2
-  operating time : 12...22 ms closing4...19 ms opening
-  safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
-  mechanical durability : 15 Mcycles
-  maximum operating rate : 3600 cyc/h 60 °C
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
-  product name : TeSys D
-  product or component type : Contactor
-  device short name : LC1D
-  contactor application : Resistive loadMotor control
-  utilisation category : AC
- 3AC
- 4AC
- 1
-  poles description : 3P
-  power pole contact composition : 3 NO
-  [Ue] rated operational voltage : Power circuit-  [Ie] rated operational current : 25 A (at - motor power kW : 5.5 kW at 220...230 V AC 50/60 Hz (AC
- 3)11 kW at 380...400 V AC 50/60 Hz (AC
- 3)11 kW at 415...440 V AC 50/60 Hz (AC
- 3)15 kW at 500 V AC 50/60 Hz (AC
- 3)15 kW at 660...690 V AC 50/60 Hz (AC
- 3)5.5 kW at 400 V AC 50/60 Hz (AC
- 4)
-  motor power HP (UL / CSA) : 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors2 hp at 115 V AC 50/60 Hz for 1 phase motors7.5 hp at 230/240 V AC 50/60 Hz for 3 phases motors15 hp at 460/480 V AC 50/60 Hz for 3 phases motors20 hp at 575/600 V AC 50/60 Hz for 3 phases motors7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors
-  control circuit type : AC at 50/60 Hz
-  [Uc] control circuit voltage : 110 V AC 50/60 Hz
-  auxiliary contact composition : 1 NO + 1 NC
-  [Uimp] rated impulse withstand voltage : 6 kV conforming to IEC 60947
-  overvoltage category : III
-  [Ith] conventional free air thermal current : 10 A (at 60 °C) for signalling circuit40 A (at 60 °C) for power circuit
-  Irms rated making capacity : 140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1450 A at 440 V for power circuit conforming to IEC 60947
-  rated breaking capacity : 450 A at 440 V for power circuit conforming to IEC 60947
-  [Icw] rated short
- time withstand current : 240 A 40 °C
-  10 s for power circuit380 A 40 °C
-  1 s for power circuit50 A 40 °C
-  10 min for power circuit120 A 40 °C
-  1 min for power circuit100 A
-  1 s for signalling circuit120 A
-  500 ms for signalling circuit140 A
-  100 ms for signalling circuit
-  associated fuse rating : 10 A gG for signalling circuit conforming to IEC 60947-5-163 A gG at - average impedance : 2 mOhm
-  Ith 40 A 50 Hz for power circuit
-  [Ui] rated insulation voltage : Power circuit :  690 V conforming to IEC 60947-4-1Power circuit :  600 V CSA certifiedPower circuit :  600 V UL certifiedSignalling circuit :  690 V conforming to IEC 60947-1Signalling circuit :  600 V CSA certifiedSignalling circuit :  600 V UL certified
-  electrical durability : 1.65 Mcycles 25 A AC
- 3 at Ue
-  power dissipation per pole : 3.2 W AC
- 11.25 W AC
- 3
-  Front cover : With
-  mounting support : PlateRail
-  standards : CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
-  product certifications : ULBVRINACCCGLGOSTDNVLROS (Lloyds register of shipping)CSA
-  connections
-  terminals : Control circuit :  screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit :  screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit :  screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable endControl circuit :  screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit :  screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit :  screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit :  screw clamp terminals 1 cable(s) 2.5…10 mm²flexible without cable endPower circuit :  screw clamp terminals 2 cable(s) 2.5…10 mm²flexible without cable endPower circuit :  screw clamp terminals 1 cable(s) 1…10 mm²flexible with cable endPower circuit :  screw clamp terminals 2 cable(s) 1.5…6 mm²flexible with cable endPower circuit :  screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable endPower circuit :  screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
-  tightening torque : Control circuit :  1.7 N.m
-  on screw clamp terminals
-  with screwdriver flat Ø 6 mmControl circuit :  1.7 N.m
-  on screw clamp terminals
-  with screwdriver Philips No 2Power circuit :  2.5 N.m
-  on screw clamp terminals
-  with screwdriver flat Ø 6 mmPower circuit :  2.5 N.m
-  on screw clamp terminals
-  with screwdriver Philips No 2
-  operating time : 12...22 ms closing4...19 ms opening
-  safety reliability level : B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
-  mechanical durability : 15 Mcycles
-  maximum operating rate : 3600 cyc/h 60 °C
This product is under Green Premium products which is Schneider Electric’s commitment to delivering products with best-in-class environmental performance. Green Premium promises compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO2 products
MAIN SPECIFICATIONS | |
---|---|
Control Type | 3P |
Product Or Component Type | contactor |
Range Of Product | TeSys D TeSys Deca |
[Ie] Rated Operational Current | 25 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 25 A (at <60 °C) at <= 440 V AC AC-3e for power circuit 40 A (at <60 °C) at <= 440 V AC AC-1 for power circuit |
[Uc] Control Circuit Voltage | 110 V AC 50/60 Hz |
[Ue] Rated Operational Voltage | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
Average Impedance | 2 mOhm - Ith 40 A 50 Hz for power circuit |
Contactor Application | motor control resistive load |
Control Circuit Type | AC at 50/60 Hz |
Device Short Name | LC1D |
Motor Power Hp | 15 hp at 460/480 V AC 50/60 Hz for 3 phases motors 2 hp at 115 V AC 50/60 Hz for 1 phase motors 20 hp at 575/600 V AC 50/60 Hz for 3 phases motors 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors 7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors 7.5 hp at 230/240 V AC 50/60 Hz for 3 phases motors |
Mounting Support | plate rail |
Pole Contact Composition | 3 NO |
Power Dissipation Per Pole | 1.25 W AC-3 1.25 W AC-3e 3.2 W AC-1 |
Protective Cover | with |
Range | TeSys TeSys Deca |
Range Name | TeSys D |
Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
Utilisation Category | AC-1 AC-3 AC-3e AC-4 |
COMPLEMENTARY | |
Communication Network Type | power circuit: <= 300 V DC power circuit: <= 690 V AC 25...400 Hz |
Product Name | TeSys D TeSys Deca |
Associated Fuse Rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 40 A gG at <= 690 V coordination type 2 for power circuit 63 A gG at <= 690 V coordination type 1 for power circuit |
Auxiliary Contact Composition | 1 NO + 1 NC |
Auxiliary Contacts Type | type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 |
Coil Technology | without built-in suppressor module |
Compatibility Code | LC1D |
Connections - Terminals | control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end power circuit: screw clamp terminals 1 cable(s) 1.5-10 mm²solid without cable end power circuit: screw clamp terminals 1 cable(s) 1-10 mm²flexible with cable end power circuit: screw clamp terminals 1 cable(s) 2.5-10 mm²flexible without cable end power circuit: screw clamp terminals 2 cable(s) 1.5-6 mm²flexible with cable end power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²flexible without cable end power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²solid without cable end |
Contact Compatibility | M2 |
Contactor Coil Voltage | 110 V AC standard |
Control Circuit Voltage Limits | 0.3...0.6 Uc (-40-70 °C):drop-out AC 50/60 Hz 0.8...1.1 Uc (-40-60 °C):operational AC 50 Hz 0.85...1.1 Uc (-40-60 °C):operational AC 60 Hz 1...1.1 Uc (60-70 °C):operational AC 50/60 Hz |
Depth | 92 mm |
Electrical Durability | 1.4 Mcycles 40 A AC-1 at Ue <= 440 V 1.65 Mcycles 25 A AC-3 at Ue <= 440 V 1.65 Mcycles 25 A AC-3e at Ue <= 440 V |
Flame Retardance | V1 conforming to UL 94 |
Height | 85 mm |
Hold-in Power Consumption In VA | 7.5-7.5 VA 60 Hz cos phi 0.3 (at 20 °C) 7-7 VA 50 Hz cos phi 0.3 (at 20 °C) |
Inrush Power In VA | 70-70 VA 50 Hz cos phi 0.75 (at 20 °C) 70-70 VA 60 Hz cos phi 0.75 (at 20 °C) |
Insulation Resistance | > 10 MOhm for signalling circuit |
Irms Rated Making Capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 450 A at 440 V for power circuit conforming to IEC 60947 |
Maximum Operating Rate | 3600 cyc/h 60 °C |
Mechanical Durability | 15 Mcycles |
Mechanical Robustness | shocks contactor closed: 15 Gn for 11 ms shocks contactor open: 8 Gn for 11 ms vibrations contactor closed: 4 Gn, 5...300 Hz vibrations contactor open: 2 Gn, 5...300 Hz |
Minimum Switching Current | 5 mA for signalling circuit |
Minimum Switching Voltage | 17 V for signalling circuit |
Motor Power KW | 11 kW at 380...400 V AC 50/60 Hz (AC-3) 11 kW at 380...400 V AC 50/60 Hz (AC-3e) 11 kW at 415...440 V AC 50/60 Hz (AC-3) 11 kW at 415...440 V AC 50/60 Hz (AC-3e) 15 kW at 500 V AC 50/60 Hz (AC-3) 15 kW at 500 V AC 50/60 Hz (AC-3e) 15 kW at 660...690 V AC 50/60 Hz (AC-3) 15 kW at 660...690 V AC 50/60 Hz (AC-3e) 5.5 kW at 220...230 V AC 50/60 Hz (AC-3) 5.5 kW at 220...230 V AC 50/60 Hz (AC-3e) 5.5 kW at 400 V AC 50/60 Hz (AC-4) |
Motor Starter Type | direct on-line contactor |
Net Weight | 0.37 kg |
Non-overlap Time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
Operating Time | 12...22 ms closing 4...19 ms opening |
Power Range | 4-6 kW at 200-240 V 3 phases 7-11 kW at 380-440 V 3 phases 7-11 kW at 480-500 V 3 phases |
Rated Breaking Capacity | 450 A at 440 V for power circuit conforming to IEC 60947 |
Signalling Circuit Frequency | 25...400 Hz |
Tightening Torque | control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2 power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 |
Width | 45 mm |
[Icw] Rated Short-time Withstand Current | 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 120 A 40 °C - 1 min for power circuit 140 A - 100 ms for signalling circuit 240 A 40 °C - 10 s for power circuit 380 A 40 °C - 1 s for power circuit 50 A 40 °C - 10 min for power circuit |
[Ith] Conventional Free Air Thermal Current | 10 A (at 60 °C) for signalling circuit 40 A (at 60 °C) for power circuit |
[Uimp] Rated Impulse Withstand Voltage | 6 kV conforming to IEC 60947 |
[Ui] Rated Insulation Voltage | power circuit: 600 V CSA certified power circuit: 600 V UL certified power circuit: 690 V conforming to IEC 60947-4-1 signalling circuit: 600 V CSA certified signalling circuit: 600 V UL certified signalling circuit: 690 V conforming to IEC 60947-1 |
ENVIRONMENT | |
Ambient Air Temperature For Operation | -40-60 °C 60-70 °C with derating |
Ambient Air Temperature For Storage | -60-80 °C |
Fire Resistance | 850 °C conforming to IEC 60695-2-1 |
Heat Dissipation | 2-3 W at 50/60 Hz |
IP Degree Of Protection | IP20 front face conforming to IEC 60529 |
Operating Altitude | 0...3000 m |
Overvoltage Category | III |
Pollution Degree | 3 |
Product Certifications | BV CCC CSA DNV GL GOST LROS (Lloyds register of shipping) RINA UKCA UL |
Protective Treatment | TH conforming to IEC 60068-2-30 |
Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60335-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
OTHER | |
Poles Description | 3P |
[Us] Rated Supply Voltage | TeSys D TeSys Deca |
Write Your Own Review