APC Back-UPS 950VA, 230V, AVR, Universal and IEC Sockets.
Schneider
SKU
SE_BX950U-MS
Model
BX950U-MS
Obsolete
Short description of BX950U MS
Battery Backup & Surge Protector for Electronics and Computers
Obsolete
| MAIN SPECIFICATIONS | |
|---|---|
| Physical Interface | 230 V |
| Pressure Sensor Type | 480 W |
| Rated Power In W | 480 W |
| Cable Length | 4 ft |
| Range Name | Back-UPS |
| GENERAL | |
| Additional Specification | entry level |
| COMPLEMENTARY | |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Battery Life | 2-5 year(s) |
| Battery Type | lead-acid battery |
| Colour | black |
| Data Line Protection | RJ11 modem/fax protection |
| Depth | 33.6 cm |
| Height | 21.5 cm |
| Input Current | 4 A (1 phase) |
| Input Protection Type | 3-pole circuit breaker |
| Input Voltage Limits | 150...280 V |
| Maximum Input Current | 4 A |
| Mounting Mode | not rack-mountable |
| Net Weight | 8 kg |
| Network Frequency | 50/60 Hz +/- 3 Hz auto-sensing |
| Output Frequency | 50/60 Hz +/- 1 Hz sync to mains 50/60 Hz +/- 1 Hz unsynchronised |
| Provided Equipment | 1 x detachable 1.2 m IEC power cord 1 x detachable 2.0 m NEMA 5-15P to IEC C13 power cord user manual |
| Rated Power In VA | 950 VA |
| Switching Current Capacity | 7 A |
| Transfer Time | 8 ms typical : 10 ms maximum |
| Width | 13 cm |
| COMMUNICATIONS & MANAGEMENT | |
| Alarm | alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Control Panel | LED status display with on line : on battery : replace battery and overload indicators |
| PHYSICAL | |
| Battery Charger Power | 9 W rated |
| Battery Curve | C |
| Battery Recharge Time | 8 h |
| Curve Equation | efficiency |
| Curve Load Maximum | 100 % |
| Curve X-axis Maximum | 100 % |
| Curve X-axis Minimum | 0 % |
| Curve X-axis Title | load |
| Curve X-axis Units | percentage |
| Curve Y-axis Maximum | 100 % |
| Curve Y-axis Minimum | 50 % |
| Curve Y-axis Title | efficiency |
| Curve Y-axis Units | percentage |
| Maximum Configurable Power In VA | 950 VA |
| Maximum Configurable Power In W | 480 W |
| Mounting Preference | no preference |
| Nb Of Power Socket Outlets | 2 IEC 60320 C13 4 universal receptacle |
| Number Of Tare Power | 15 W |
| Redundant | no |
| Show Note OP Temperature | no |
| Size UPS Version | workstation |
| Surge Energy Rate | 273 J |
| UPS Type | line interactive |
| USB Compatible | yes |
| INPUT | |
| Number Of Cables | 2 |
| OUTPUT | |
| Curve Fixed Loss | 0.0276 |
| Curve Load Minimum | 3 % |
| Curve Square Loss | 0.002 |
| Curve Test Cond ID | Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output. |
| Graph Display | 1 |
| Wave Type | stepped approximation to a sinewave |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | 0-40 °C |
| Ambient Air Temperature For Storage | -15-45 °C |
| Operating Altitude | 0...10000 ft |
| Relative Humidity | 0-95 % non-condensing |
| ENVIRONMENTAL | |
| Acoustic Level | 45 dBA |
| Battery Power In VAh | 108 VAh capacity 76 VAh runtime |
| Number Of Battery Filled Slots | 1 |
| Plug Standard | IEC 60320 C14 NEMA 5-15P |
| Storage Altitude | 0-30000 ft |
| Storage Relative Humidity | 0-95 % non-condensing |
| UPS Size | WS |
