Communication Module - for TeSys U.
Schneider
SKU
SE_ASILUFC51
Model
ASILUFC51
SGD $420.74
Short description of ASILUFC51
All-in-one motor starters up to 38 A (18.5 kW / 400 V)
Country of Origin
France
range : TeSys
- device short name : ASILUL
- product or component type : Communication module
- product compatibility : LUCBLUCMLUCDLUCALUCLLUCC
- device application : Communication
- range compatibility : TeSys U LUB non reversing power baseTeSys U LU2B reversing power base
- device short name : ASILUL
- product or component type : Communication module
- product compatibility : LUCBLUCMLUCDLUCALUCLLUCC
- device application : Communication
- range compatibility : TeSys U LUB non reversing power baseTeSys U LU2B reversing power base
| MAIN SPECIFICATIONS | |
|---|---|
| Display Type | 7.A.7.E |
| Physical Interface | 7.A.7.E |
| Product Or Component Type | communication module |
| Range Of Product | TeSys U |
| Device Short Name | ASILUL |
| Function Available | communication module |
| Range | TeSys |
| Range Compatibility | TeSys U LU2B reversing power base TeSys U LUB non reversing power base |
| Range Name | TeSys U |
| COMPLEMENTARY | |
| Addressing | 62 slaves |
| Bus Type | AS-Interface |
| Connection Pitch | 3.81 mm output 5.08 mm input |
| Connections - Terminals | input: screw clamp terminals 1 cable(s) 0.2-1.5 mm²flexible without cable end input: screw clamp terminals 1 cable(s) 0.2-1.5 mm²rigid without cable end input: screw clamp terminals 1 cable(s) 0.25-1.5 mm²flexible with cable end input: screw clamp terminals 2 cable(s) 0.2-1 mm²flexible without cable end input: screw clamp terminals 2 cable(s) 0.2-1 mm²rigid without cable end input: screw clamp terminals 2 cable(s) 0.25-1 mm²flexible with cable end input: screw clamp terminals 2 cable(s) 0.5-1 mm²flexible with cable end output: screw clamp terminals 1 cable(s) 0.14-1 mm²flexible without cable end output: screw clamp terminals 1 cable(s) 0.14-1 mm²rigid without cable end output: screw clamp terminals 1 cable(s) 0.25-0.5 mm²flexible with cable end output: screw clamp terminals 1 cable(s) 0.25-1 mm²flexible with cable end output: screw clamp terminals 2 cable(s) 0.14-0.5 mm²rigid without cable end output: screw clamp terminals 2 cable(s) 0.14-0.75 mm²flexible without cable end output: screw clamp terminals 2 cable(s) 0.25-0.34 mm²flexible with cable end output: screw clamp terminals 2 cable(s) 0.5-0.5 mm²flexible with cable end |
| Current Consumption | 200 mA at 24 V output 25 mA normal operation 30 mA fault condition |
| Device Application | communication |
| Local Signalling | 2 LEDs front panel |
| Mounting Location | front side |
| Mounting Mode | plug-in |
| Number Of Outputs | 2 dedicated to starter-controller coil operation |
| Product Compatibility | LUCA LUCB LUCC LUCD LUCL LUCM |
| Return Time | 10 ms |
| Tightening Torque | input: 0.5-0.6 N.m3.5 mm output: 0.2-0.25 N.m2.5 mm |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -25-70 °C |
| IP Degree Of Protection | IP20 conforming to IEC 60529 |
| Product Certifications | AS-Interface V2.1 No 52303 |
| OTHER | |
| Poles Description | communication module |
| [Us] Rated Supply Voltage | TeSys U |
Write Your Own Review