CP-E 12/10.0 Power supply In:115/230VAC Out: 12VDC/10A
ABB
SKU
AB_1SVR427035R1000
Model
CP-E-12/10.0
SGD $214.12
Short description of CP E 12/10.0
CP-E 12/10.0 Power supply In:115/230VAC Out: 12VDC/10A
Country of Origin
Taiwan, Province Of China (TW)
The CP-E 12/10.0 is a power supply from the CP-E range. The primary switch mode power supply offers a wide range input of 90-132 V AC, 180-264 V AC and 210-375 V DC, rated input voltage is 115 or 230 V AC (auto select). The rated output power is 120 W, rated output current is 10 A at an output voltage of 12 V DC. The output voltage is adjustable within a range of 11.4 to 14.5 V DC. The power supply provides an U/I output characteristic. In order to increase capacity, up to 3 units can be connected in parallel. A redundancy unit is available as accessory.
| MAIN SPECIFICATION | |
|---|---|
| ABB Global ID | ABB1SVR427035R1000 |
| Business Area (Master Data) Name | Electrification |
| Catalog Description | CP-E 12/10.0 Power supply In:115/230VAC Out: 12VDC/10A |
| Division (Master Data) Name | Smart Power |
| EAN | 4016779669719 |
| Rated Insulation Voltage (Ui) | Input Circuit / Output Circuit 3 volt Input Circuit / PE 2 volt |
| SKU ID | 1SVR427035R1000 |
| TECHNICAL | |
| Characteristic Of Output | U/I characteristic curve |
| Connecting Capacity Input Circuit | Flexible with Ferrule 0.2 ... 4 mm² Rigid 0.2 ... 6 mm² |
| Connecting Capacity Output Circuit | Flexible with Ferrule 0.2 ... 4 mm² Rigid 0.2 ... 6 mm² |
| Input Voltage (Uin) | 90 ... 132 V AC 180 ... 264 V AC 210 ... 375 V DC |
| Minimum Mounting Distance | Electrical Conductive Board, Horizontal 25 mm Electrical Conductive Board, Vertical 25 mm Other Device Same Type, Horizontal 25 mm Other Device Same Type, Vertical 25 mm |
| Mounting Position | Position 1 |
| Output Current | 10 A |
| Output Power | 120 W |
| Output Voltage (Uout) | 12 V DC |
| Pollution Degree | 2 |
| Rated Frequency Limits | 47 ... 63 Hz |
| Standards | ANSI/ISA-12.12 CAN/CSA C22.2 No.107.1 CAN/CSA C22.2 No.213 CAN/CSA C22.2 No.60950 IEC/EN 63000 IEC 60950-1 IEC/EN 61000-6-2 IEC/EN 61000-6-3 UL 508 UL 60950 |
| Tightening Torque | Input Circuit 1 N·m Output Circuit 0.62 N·m |
| Wire Stripping Length | Input Circuit 8 mm Output Circuit 8 mm |
| TECHNICAL UL/CSA | |
| Connecting Capacity Input Circuit UL/CSA | Rigid 24-10 AWG |
| Connecting Capacity Output Circuit UL/CSA | Rigid 24-10 AWG |
| Tightening Torque UL/CSA | Input Circuit 9 in·lb Output Circuit 5.5 in·lb |
| ORDERING | |
| Minimum Order Quantity | 1 piece |
| ENVIRONMENTAL | |
| RoHS Status | Following EU Directive 2011/65/EU |
| CLASSIFICATIONS | |
| E-Number (Finland) | 2712066 |
| EClass | V11.0 : 27040701 |
| ETIM 4 | EC002540 - DC-power supply |
| ETIM 5 | EC002540 - DC-power supply |
| ETIM 6 | EC002540 - DC-power supply |
| ETIM 7 | EC002540 - DC-power supply |
| Object Classification Code | T |
| UNSPSC | 39121004 |
| ELECTROMAGNETIC COMPATIBILITY | |
| Conducted Disturbances Immunity Acc. To IEC 61000-4-6 | Level 3 10 V |
| Electrical Fast Transient (Burst Immunity) Acc. To IEC 61000-4-4 | Level 4 Power Supply Port Signal 4 kV |
| Electromagnetic Compatibility (EMC) | Immunity - Class B Emission - Class B |
| Electrostatic Discharge (ESD Immunity) Acc. To IEC 61000-4-2 | Level 4 Air Discharge 15 kV Level 4 Contact Discharge 8 kV |
| Radiated Electromagnetic Field Immunity Acc. To IEC 61000-4-3 | Level 3 10 V/m |
| Surge Immunity Acc. To IEC 61000-4-5 | Level 3 Line-to-Line 2 kV Level 4 Line-to-Ground 4 kV |
| OTHER | |
| Ambient Air Temperature | Operation -35 ... +70 °C Storage -40 ... +85 °C |
| Degree Of Protection | Housing IP20 Terminals IP20 |
| Function | Switch mode power supply |
| Number Of Phases | 1 |
| Product Net Width | 63.2 |
| Rated Input Voltage (UIN) | 115 / 230 V AC |
| Rated Output Current | 10 A |
| Rated Output Power | 120 W |
| Rated Output Voltage | 12 V DC |
Write Your Own Review