CM-PVS.31S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC
ABB
SKU
AB_1SVR730794R1300
Model
CM-PVS.31S
SGD $245.61
Short description of CM PVS.31S
CM-PVS.31S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC
Country of Origin
Germany (DE)
The CM-PVS.31S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.31S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.
| MAIN SPECIFICATION | |
|---|---|
| ABB Global ID | ABB1SVR730794R1300 |
| Business Area (Master Data) Name | Electrification |
| Catalog Description | CM-PVS.31S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC |
| Division (Master Data) Name | Smart Power |
| EAN | 4016779851831 |
| Rated Insulation Voltage (Ui) | Input Circuit / Output Circuit 600 volt Output Circuit 1 / Output Circuit 2 300 volt |
| SKU ID | 1SVR730794R1300 |
| TECHNICAL | |
| Connecting Capacity | Flexible with Ferrule 1x 0.5 ... 2.5 mm² Flexible with Ferrule 2x 0.5 ... 1.5 mm² Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm² Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm² Flexible 1x 0.5 ... 2.5 mm² Flexible 2x 0.5 ... 1.5 mm² Rigid 1x 0.5 ... 4 mm² Rigid 2x 0.5 ... 2.5 mm² |
| Electrical Durability | AC-12 100000 cycle |
| Mechanical Durability | 30000000 cycle |
| Minimum Switching Capacity | 24 V 10 mA |
| Mounting On DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Mounting Position | Any |
| Overvoltage Category | III |
| Pollution Degree | 3 |
| Rated Frequency (f) | Supply Circuit 50/60 Hz |
| Rated Operational Current AC-15 (Ie) | (230 V) 3 A |
| Rated Operational Current DC-13 (Ie) | (24 V) 2 A |
| Recommended Screw Driver | Pozidriv 1 4.5 0.8 x 4 |
| Short-Circuit Protective Devices | Output Circuit NC - F Type Fuses 6 A Output Circuit NO - F Type Fuses 10 A |
| Standards | CAN/CSA C22.2 No.14 IEC/EN 63000 IEC/EN 60255-27 IEC/EN 61000-6-2 IEC/EN 61000-6-3 UL 508 |
| Terminal Type | Screw Terminals |
| Tightening Torque | 0.6 ... 0.8 N·m |
| Wire Stripping Length | 8 mm |
| TECHNICAL UL/CSA | |
| Connecting Capacity UL/CSA | Flexible 1x 18-14 AWG Flexible 2x 18-16 AWG Rigid 1x 20-12 AWG Rigid 2x 20-14 AWG |
| Contact Rating UL/CSA | B300 |
| Maximum Operating Voltage UL/CSA | Output Circuit 300 V AC |
| Tightening Torque UL/CSA | 7.08 in·lb |
| ORDERING | |
| Minimum Order Quantity | 1 piece |
| ENVIRONMENTAL | |
| RoHS Status | Following EU Directive 2011/65/EU |
| CLASSIFICATIONS | |
| E-Number (Finland) | 2712292 |
| E-Number (Sweden) | 3860583 |
| EClass | V11.0 : 27371803 |
| ETIM 4 | EC001441 - Phase monitoring relay |
| ETIM 5 | EC001441 - Phase monitoring relay |
| ETIM 6 | EC001441 - Phase monitoring relay |
| ETIM 7 | EC001441 - Phase monitoring relay |
| Object Classification Code | B |
| UNSPSC | 39121536 |
| OTHER | |
| Ambient Air Temperature | Operation -25 ... +60 °C Storage -40 ... +85 °C |
| Degree Of Protection | Housing IP50 Terminals IP20 |
| Function | Phase failure detection Phase sequence monitoring Over- and undervoltage monitoring |
| Measuring Range | (L-L) 160 ... 300 V AC |
| Output | 2 c/o (SPDT) contacts |
| Product Net Width | 22.5 |
| Rated Control Supply Voltage (Us) | (L-L) 160 ... 300 V AC |
| Rated Impulse Withstand Voltage (Uimp) | Input Circuit 6 kilovolt Output Circuit 4 kilovolt |
| Rated Operational Current AC-12 (Ie) | (230 V) 4 A |
| Rated Operational Current DC-12 (Ie) | (24 V) 4 A |
| Time Range | 200 ms start-up delay 0 s or 0.1 ... 30 s tripping delay (ON or OFF) |
Write Your Own Review