Variable Speed Drive, Altivar Machine ATV320, 5.5 KW, 380...500 V, 3 Phases, Compact
Schneider
SKU
SE_ATV320U55N4C
Model
ATV320U55N4C
SGD $1,139.83
Short description of ATV320U55N4C
ATV320 5,5kW 400V 3ph compact
Country of Origin
Indonesia
| MAIN SPECIFICATIONS | |
|---|---|
| Analog/digital Conversion | software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Analogue Input Number | 3 |
| Analogue Input Range | 3 |
| Discrete Input Number | 7 |
| Discrete Output Type | open collector DQ- 0-1 kHz 30 V DC 100 mA open collector DQ+ 0-1 kHz 30 V DC 100 mA |
| Product Or Component Type | variable speed drive |
| Range Of Product | Altivar Machine ATV320 |
| Communication Port Protocol | CANopen Modbus serial |
| Design Of Frequency Changer | U converter |
| EAN13 | 3606489917791 |
| EMC Filter | Class C2 EMC filter integrated |
| Format Of The Drive | compact |
| Line Current | 14.5 A at 500 V (heavy duty) 20.7 A at 380 V (heavy duty) |
| Method Of Access | slave CANopen |
| Network Number Of Phases | 3 phases |
| Number Of Input Phases | 3 |
| Number Of Output Phases | 3 |
| Product Specific Application | complex machines |
| Range Name | Altivar 320 |
| Relative Symmetric Mains Voltage Tolerance | 10 % |
| COMPLEMENTARY | |
| Analogue Input Type | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Analogue Output Number | 1 |
| Analogue Output Type | software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Discrete Output Number | 3 |
| Output Voltage | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Port Ethernet | 3 |
| [Ics] Rated Service Breaking Capacity | open collector DQ- 0-1 kHz 30 V DC 100 mA open collector DQ+ 0-1 kHz 30 V DC 100 mA |
| 1 Phase Low Current Possible | false |
| 4 Quadrant Operation Possible | true |
| Acceleration And Deceleration Ramps | acceleration/deceleration automatic stop with DC injection acceleration/deceleration ramp adaptation CUS linear ramp switching S U |
| Accuracy | +/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C analog input +/- 0.7 % AI1, AI2, AI3 for a temperature of -10...60 °C analog input +/- 1 % AQ1 for a temperature of 25 °C analog output +/- 2 % AQ1 for a temperature of -10...60 °C analog output |
| Apparent Power | 12.6 kVA at 500 V (heavy duty) |
| Application In Domestic And Commercial Area Permitted | false |
| Application In Industrial Area Permitted | true |
| Asynchronous Motor Control Profile | flux vector control without sensor - Energy Saving flux vector control without sensor, standard voltage/frequency ratio - Energy Saving, quadratic U/f voltage/frequency ratio, 2 points voltage/frequency ratio, 5 points |
| Base Load Current At High Overload | 14.3 A |
| Brake Chopper Integrated | true |
| Braking To Standstill | by DC injection |
| Capacity Of DC Link | 780 µF |
| Computer Port | true |
| Depth | 178 mm |
| Discrete Input Logic | negative logic (sink) positive logic (source) |
| Discrete Input Type | DI1...DI6 logic inputs, 24 V DC (30 V) DI5 programmable as pulse input: 0-30 kHz, 24 V DC (30 V) STO safe torque off, 24 V DC, impedance: 1.5 kOhm |
| EMC Limit Value (complied) | true |
| Encoder Protocol | RS 422 |
| Height | 232 mm |
| Housing Material | plastic |
| Linearity Error | AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog input AQ1: +/- 0.3 % for analog output |
| Marking | ATEX CE CSA EAC RCM UL |
| Maximum Associated Fuse Rating | 40 A |
| Maximum Input Current | 20.7 A |
| Maximum Output Frequency | 0.599 kHz |
| Maximum Output Voltage | 500 V |
| Maximum Switching Current | relay output R1A, R1B, R1C on resistive load, cos phi = 1 : 3 A at 250 V AC relay output R1A, R1B, R1C on resistive load, cos phi = 1 : 3 A at 30 V DC relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC relay output R2A, R2C on resistive load, cos phi = 1 : 5 A at 250 V AC relay output R2A, R2C on resistive load, cos phi = 1 : 5 A at 30 V DC |
| Minimum Switching Current | relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| Motor Power KW | 5.5 kW for heavy duty |
| Motor Slip Compensation | adjustable 0...300 % automatic whatever the load not available in voltage/frequency ratio (2 or 5 points) |
| Mounting Mode | wall mount |
| Net Weight | 3.5 kg |
| Network Frequency | 50...60 Hz |
| Nominal Output Current | 14.3 A |
| Nominal Output Power | 5.5 kW |
| Nominal Switching Frequency | 4 kHz |
| Number Of HW Interfaces Other | 1 |
| Number Of HW Interfaces Serial RS485 | 1 |
| Operating Element Present | true |
| Operating Position | vertical +/- 10 degree |
| Optical Interface Present | false |
| Option Card | communication module, CANopen communication module, DeviceNet communication module, EtherCAT communication module, Ethernet Powerlink communication module, EtherNet/IP communication module, Profibus DP V1 communication module, Profinet |
| Power Dissipation In W | fan: 195.0 W at 380 V, switching frequency 4 kHz |
| Power Loss Per Device Current Dependent | 195 W |
| Power Loss Static Current Independent | 195 W |
| Prospective Line Isc | 22 kA |
| Protection Type | input phase breaks: drive overcurrent between output phases and earth: drive overheating protection: drive short-circuit between motor phases: drive thermal protection: drive |
| Refresh Time | logic input (DI1...DI4): 8 ms relay output (R1A, R1B, R1C): 2 ms relay output (R2A, R2C): 2 ms |
| Relative Symmetric Network Frequency Tolerance | 5 % |
| Relay Output Type | configurable relay logic R1A 1 NO electrical durability 100000 cycles configurable relay logic R1B 1 NC electrical durability 100000 cycles configurable relay logic R1C configurable relay logic R2A 1 NO electrical durability 100000 cycles configurable relay logic R2C |
| Sampling Duration | 2 ms (AI1, AI2, AI3) - analog input 2 ms (AQ1) - analog output |
| Speed Accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Supporting Protocol For AS-Interface Safety At Work | false |
| Supporting Protocol For ASI | false |
| Supporting Protocol For BACnet | false |
| Supporting Protocol For CAN | true |
| Supporting Protocol For Data-Highway | false |
| Supporting Protocol For DeviceNet | true |
| Supporting Protocol For DeviceNet Safety | false |
| Supporting Protocol For EtherNet/IP | true |
| Supporting Protocol For Foundation Fieldbus | false |
| Supporting Protocol For INTERBUS | false |
| Supporting Protocol For INTERBUS-Safety | false |
| Supporting Protocol For KNX | false |
| Supporting Protocol For LON | false |
| Supporting Protocol For MODBUS | true |
| Supporting Protocol For Other Bus Systems | true |
| Supporting Protocol For PROFIBUS | true |
| Supporting Protocol For PROFINET CBA | false |
| Supporting Protocol For PROFINET IO | true |
| Supporting Protocol For PROFIsafe | false |
| Supporting Protocol For SafetyBUS P | false |
| Supporting Protocol For SERCOS | false |
| Supporting Protocol For SUCONET | false |
| Supporting Protocol For TCP/IP | true |
| Switching Frequency | 2...16 kHz adjustable 4...16 kHz with derating factor |
| Synchronous Motor Control Profile | vector control without sensor |
| Transient Overtorque | 170-200 % of nominal motor torque |
| Width | 150 mm |
| With Safety Function Safe Brake Management (SBC/SBT) | false |
| With Safety Function Safe Direction (SDI) | false |
| With Safety Function Safe Operating Stop (SOS) | false |
| With Safety Function Safe Position (SP) | false |
| With Safety Function Safe Programmable Logic | false |
| With Safety Function Safe Speed Monitor (SSM) | false |
| With Safety Function Safe Stop 1 (SS1) | true |
| With Safety Function Safe Torque Off (STO) | true |
| With Safety Function Safely Limited Position (SLP) | false |
| With Safety Function Safely Limited Speed (SLS) | true |
| With Sft Fct Safe Stop 2 (SS2) | false |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -10-50 °C without derating -10-60 °C 50-60 °C with derating factor |
| Ambient Air Temperature For Storage | -25-70 °C |
| Ambient Air Transport Temperature | -25-70 °C |
| Electromagnetic Compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental Class (during Operation) | class 3C3 according to IEC 60721-3-3 class 3S2 according to IEC 60721-3-3 |
| Environmental Class (during Storage) | class 1C3 according to EN 60721-3 class 1S2 according to EN 60721-3 |
| Environmental Class (during Transport) | class 2C3 according to EN 60721-3 class 2S1 according to EN 60721-3 |
| IP Degree Of Protection | IP20 |
| Maximum Acceleration Under Shock Impact (during Operation) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Shock Load (during Storage) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Shock Load (during Transport) | 150 m/s² at 11 ms |
| Maximum Acceleration Under Vibrational Stress (during Operation) | 10 m/s² at 13...200 Hz |
| Maximum Acceleration Under Vibratory Load (during Storage) | 10 m/s² at 13...200 Hz |
| Maximum Acceleration Under Vibratory Load (during Transport) | 10 m/s² at 13...200 Hz |
| Maximum Deflection Under Vibratory Load (during Operation) | 1.5 mm at 2...13 Hz |
| Maximum Deflection Under Vibratory Load (during Storage) | 3.5 mm at 2...13 Hz |
| Maximum Deflection Under Vibratory Load (during Transport) | 3.5 mm at 2...13 Hz |
| NEMA Degree Of Protection | NEMA 1 |
| Overvoltage Category | III |
| Permitted Relative Humidity (during Operation) | class 3K5 according to EN 60721-3 |
| Permitted Relative Humidity (during Storage) | class 1K5 according to EN 60721-3 |
| Permitted Relative Humidity (during Transport) | class 2K5 according to EN 60721-3 |
| Pollution Degree | 2 |
| Product Certifications | ATEX CE EAC GOST KC NOM RCM |
| Regulation Loop | adjustable PID regulator |
| Standards | EN/IEC 61800-5-1 |
| Volume Of Cooling Air | 60 m3/h |
| OTHER | |
| Poles Description | variable speed drive |
| [Us] Rated Supply Voltage | 380...500 V 380...500 V - 15...10 % |
Write Your Own Review