Soft Starter for Asynchronous Motor - ATS01 - 12 A - 380..415V - 5.5 KW
Schneider
SKU
SE_ATS01N212QN
Model
ATS01N212QN
SGD $261.17
Short description of ATS01N212QN
SOFT-START STOP 12A 380 415V
Country of Origin
Germany
soft starter for asynchronous motor
- ATS01
- 12 A
- 380..415V
- 5.5 KW.
Label : Altistart 01
- range of product : Altistart 01
- motor power kW : 5.5 kW, 3 phases at 380...415 V
- IcL starter rating : 12 A
- utilisation category : AC
- 53B conforming to EN/IEC 60947-4-2
- current consumption : 60 A at nominal load
- product or component type : soft starter
- type of start : start with voltage ramp
- power dissipation in W : 4 W at full load and at end of starting, 124 W in transient state
- product destination : asynchronous motors
- product specific application : simple machine
- device short name : ATS01
- network number of phases : 3 phases
- [Us] rated supply voltage : 380...415 V
- 10...10 %
- Range Presentation : Single-phase 110
- 230 V
- 3-phase 200... 480 V 50/60 Hz
- 0.37 to 15 kW*
- Adjustable starting and deceleration times : 5 seconds or
- 10 seconds
- Adjustable unjamming torque
- Integrated bypass contactor
- Simple dialogue by 2 LEDs
- Signalling on completion of starting
- 24 V integrated power supply (ATS01N2...).
- “Boost” function for difficult starting conditions (ATS01N2...).* range available up to 75 kW : please refer to our catalogue
- Range Benefits : The starting solution ...
Extremely compact, the Altistart 01 combines simplicity (easy cabling, fast configuration, etc.) and efficiency; reduces machine wear, minimises maintenance time, etc.
With TeSys® Model U, the first motor starter
- controller, you benefit from a unique motor starter solution.
- Range Application Presentation :
- Small compressors, fans
- Conveyors, mats
- Washing gantries
- Advanced systems and decentralised architectures
- ATS01
- 12 A
- 380..415V
- 5.5 KW.
Label : Altistart 01
- range of product : Altistart 01
- motor power kW : 5.5 kW, 3 phases at 380...415 V
- IcL starter rating : 12 A
- utilisation category : AC
- 53B conforming to EN/IEC 60947-4-2
- current consumption : 60 A at nominal load
- product or component type : soft starter
- type of start : start with voltage ramp
- power dissipation in W : 4 W at full load and at end of starting, 124 W in transient state
- product destination : asynchronous motors
- product specific application : simple machine
- device short name : ATS01
- network number of phases : 3 phases
- [Us] rated supply voltage : 380...415 V
- 10...10 %
- Range Presentation : Single-phase 110
- 230 V
- 3-phase 200... 480 V 50/60 Hz
- 0.37 to 15 kW*
- Adjustable starting and deceleration times : 5 seconds or
- 10 seconds
- Adjustable unjamming torque
- Integrated bypass contactor
- Simple dialogue by 2 LEDs
- Signalling on completion of starting
- 24 V integrated power supply (ATS01N2...).
- “Boost” function for difficult starting conditions (ATS01N2...).* range available up to 75 kW : please refer to our catalogue
- Range Benefits : The starting solution ...
Extremely compact, the Altistart 01 combines simplicity (easy cabling, fast configuration, etc.) and efficiency; reduces machine wear, minimises maintenance time, etc.
With TeSys® Model U, the first motor starter
- controller, you benefit from a unique motor starter solution.
- Range Application Presentation :
- Small compressors, fans
- Conveyors, mats
- Washing gantries
- Advanced systems and decentralised architectures
| MAIN SPECIFICATIONS | |
|---|---|
| Analogue Input Number | 380...415 V - 10...10 % |
| Discrete Output Type | open collector logic LO1 end of starting signal relay outputs R1A, R1C NO |
| Display Type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
| Physical Interface | <= power supply voltage |
| Product Or Component Type | soft starter |
| Range Of Product | Altistart 01 |
| [Uc] Control Circuit Voltage | built into the starter |
| Device Short Name | ATS01 |
| Discrete Input Voltage | 24...40 V |
| Discrete Output Voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| EAN13 | 3389110667264 |
| Function Available | integrated bypass |
| IcL Starter Rating | 12 A |
| Network Number Of Phases | 3 phases |
| Product Specific Application | simple machine |
| Range Name | Altistart 01 |
| Type Of Start | start with voltage ramp |
| Utilisation Category | AC-53B conforming to EN/IEC 60947-4-2 |
| COMPLEMENTARY | |
| Analogue Output Number | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
| Output Voltage | <= power supply voltage |
| [Ics] Rated Service Breaking Capacity | open collector logic LO1 end of starting signal relay outputs R1A, R1C NO |
| Assembly Style | with heat sink |
| Compatibility Code | ATS01N2 |
| Current Consumption | 60 A at nominal load |
| Deceleration Time Symb | adjustable from 1 to 10 s |
| Depth | 131 mm |
| Discrete Input Logic | positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| Discrete Input Type | logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete Output Current | 2 A DC-13 3 A AC-15 |
| Electrical Connection | 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit |
| Height | 124 mm |
| Marking | CE |
| Maximum Switching Current | relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Minimum Switching Current | 10 mA at 6 V DC for relay outputs |
| Motor Power KW | 5.5 kW, 3 phases at 380...415 V |
| Motor Starter Type | soft starter |
| Net Weight | 0.42 kg |
| Network Frequency | 47.5...63 Hz |
| Operating Position | vertical +/- 10 degree |
| Power Dissipation In W | 124 W in transient state 4 W at full load and at end of starting |
| Power Range | 4-6 kW at 380-440 V 3 phases |
| Product Destination | asynchronous motors |
| Starting Time | adjustable from 1 to 10 s |
| Starting Torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Supply Frequency | 50...60 Hz - 5...5 % |
| Supply Voltage Limits | 342-456 V |
| Tightening Torque | 0.5-0.5 N.m 1.9-2.5 N.m |
| Width | 45 mm |
| ENVIRONMENT | |
| Ambient Air Temperature For Operation | -10-40 °C (without derating) 40-50 °C (with current derating of 2 % per °C) |
| Ambient Air Temperature For Storage | -25-70 °C conforming to EN/IEC 60947-4-2 |
| Electromagnetic Compatibility | conducted and radiated emissions level B conforming to CISPR 11 conducted and radiated emissions level B conforming to IEC 60947-4-2 damped oscillating waves level 3 conforming to IEC 61000-4-12 electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 harmonics conforming to IEC 1000-3-2 harmonics conforming to IEC 1000-3-4 immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 immunity to electrical transients level 4 conforming to IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| IP Degree Of Protection | IP20 |
| Operating Altitude | <= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m |
| Pollution Degree | 2 conforming to EN/IEC 60947-4-2 |
| Product Certifications | B44.1-96/ASME A17.5 for starter wired to the motor delta terminal CCC CSA C-Tick GOST UL |
| Relative Humidity | 5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Shock Resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Standards | EN/IEC 60947-4-2 |
| Vibration Resistance | 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6 |
| OTHER | |
| Poles Description | soft starter |
| [Us] Rated Supply Voltage | 380...415 V - 10...10 % |
Write Your Own Review