Singapore GST will increase from 8% to 9%

(Effective from Jan 1, 2024)

Electgo: Your trusted Source for Electrical Components in Singapore

An Authorized Supplier Offering a Comprehensive Range of Electrical Component Categories

Loading...

Controller, Harmony SCU, Rear Module Panel, Dig 8 Inputs/8 Outputs +Ana 4 In/2 Out.

Schneider
SKU
SE_HMISBC
Model
HMISBC
SGD $2,585.62

Short description of HMISBC

Cut out free HMI controller
Country of Origin
Indonesia
-
+

UOM: Piece

In stock
In Stock 0
Backorder Leadtime: 5 To 7 Weeks

Certificate of Conformance (COC) can be provided upon purchase subjected to manufacturer approval.

*All information are subjected to changes without prior notice.
range of product : Harmony SCU
-  product or component type : Controller
-  device presentation : Basic element
MAIN SPECIFICATIONS
Analogue Input Number2 for analog input
2 for RTDs
Analogue Input Range0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
Discrete Input Number2 for fast input (normal mode) conforming to IEC 61131-2 Type 1
6 for digital input conforming to IEC 61131-2 Type 1
Discrete Output Type0...20 mA/4...20 mA (> 300 Ohm) for open-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
Product Or Component Typecontroller
Range Of ProductHarmony SCU
Discrete Input Voltage24 V DC, discrete input logic: sink or source (positive/negative)
Discrete Output Voltage220 V AC (voltage limit: 100...250 V) with relay discrete output(s)
24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
Enclosure MaterialPC/PBT
Operating SystemHarmony
Processor NameCPU RISC
Range NameMagelis SCU
Software DesignationSoMachine
COMPLEMENTARY
Analogue Input TypeRTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...600 °C - resolution: 16 bits temperature probe: Pt 100/Pt 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
Analogue Output Number2 resistive load for 12 bits + sign
Analogue Output Range0...20 mA/4...20 mA (> 300 Ohm) for open-circuit
-10...10 V/0...10 V (> 2 kOhm) for short-circuit
Connector Type0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)
-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm
Discrete Output Number2 fast output (normal mode), output logic: source
6 digital output, output logic: source
Output VoltageRTD at - 200...1300 °C - resolution: 16 bits (thermocouple N)
RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)
RTD at - 200...600 °C - resolution: 16 bits temperature probe: Pt 100/Pt 1000
RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)
RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)
RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)
RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000
RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)
RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)
RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)
Port Ethernet2 fast output (normal mode), output logic: source
6 digital output, output logic: source
Absolute Accuracy Error+/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
Configurable Filtering Time0 ms no filter (none)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)
Connection Pitch3.5 mm
Depth102 mm
Device Presentationbasic element
Discrete Input Current5 mA for digital
7.83 mA for fast input
Discrete Output Current2 A 4 A), response time 2 ms with closing contact for digital output
2 A 4 A), response time 5 ms with opening contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)
Downloadable ProtocolsCANopen
Modbus
Modbus TCP/IP
Fixing Modeby 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel
Height50.65 mm
Immunity To Microbreaks10 ms
Input Impedance2.81 kOhm
4.7 kOhm
Input/output Number2 for fast input, terminal(s): FI0...FI1
2 for fast output, terminal(s): FQ0...FQ1
6 for digital input, terminal(s): DI0...DI5
6 for digital output, terminal(s): DQ0...DQ5
Inrush Current30 A
Insulation Resistance> 10 MOhm between power supply and earth
> 10 MOhm between the I/O and internal logic
Integrated Connection Type CANopen master bus - SUB-D 9
1 Ethernet TCP/IP - RJ45
1 serial link - RJ45 - RS232/RS485 (rate: <= 115.2 kbits/s)
1 USB 2.0 type A
1 USB 2.0 type mini B
Isolation Between Channelsnone
Isolation Between Channels And Internal Logic500 V DC
Local Signallingno indicator
MarkingCE
Maximum Cable Distance Between Devicesshielded cable: <10 m for fast input
shielded cable: <100 m for digital input
unshielded cable: <50 m for digital input
Maximum Input Frequency100 kHz for fast input - control type pulse/direction
100 kHz for fast input - control type single phase
100 kHz for fast input (encoder mode) - control type A/B
Maximum Output Frequency1 kHz for fast output (PWM mode)
100 kHz for fast output (PTO mode)
Memory Descriptionapplication run DRAM, 128 MB
flash NAND, 128 MB
internal data storage FRAM, 128 kB
Net Weight0.398 kg
Number Of Common Point1 for digital input
1 for fast input (HSC mode)
Number Of Pageslimited by internal memory capacity
Overvoltage Protectionwith overvoltage protection
Power Consumption In W15 W
Processor Frequency333 MHz
Realtime Clockbuilt-in
Sensor Power Supply15-28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA
15-28.8 V DC >= 15 V, current (state 1): >= 5 mA <= 5 V, current (state 0): <= 1.5 mA
Supplyexternal source
Width128 mm
ENVIRONMENT
Ambient Air Temperature For Operation0-50 °C
Ambient Air Temperature For Storage-20-60 °C
Electromagnetic Compatibilityconducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2
radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011
surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Environmental Characteristiccorrosive gas free
IP Degree Of ProtectionIP20 (rear panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529
Maximum Pressure800...1114 hPa
NEMA Degree Of ProtectionNEMA 4X front panel
Operating Altitude<= 2000 m
Pollution Degree2 conforming to IEC 60664
Product CertificationsC-Tick
cUL 1604 Class 1 Division 2
cULus 508
cULus CSA 22-2 No 142
GOST
KCC
Relative Humidity5-85 % without condensation
Shock Resistance147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27
StandardsANSI/ISA 12-12-01
CSA C22.2 No 213 Class I Division 2
EN 61131-2
FCC Class A
IEC 61000-6-2
UL 508
Vibration Resistance+/- 3.5 mm (f = 5-9 Hz) conforming to IEC 60068-2-6
1 gn (f = 9-150 Hz) conforming to IEC 60068-2-6
ENVIRONMENTAL
Storage Altitude0-10000 m
OTHER
Poles Descriptioncontroller
[Us] Rated Supply Voltage24 V (20.4-28.8 V)DC
Write Your Own Review
You're reviewing:Controller, Harmony SCU, Rear Module Panel, Dig 8 Inputs/8 Outputs +Ana 4 In/2 Out.
Your Rating